Identificador: 1335
Abierta
LIJADORA DE BANDA - MESA MOVIBLE – 1 BANDA – MOTOR 5 HP - MESA 30”X 96” - USO RUDO
AMXmachinery
Descripción
PARTE: 2DO-PMC-HD – LIJADORA DE BANDA - MESA MOVIBLE – 1 BANDA – MOTOR 5 HP - MESA 30”X 96” - USO RUDO
Nueva con garantía
Heavy duty welded structure. They feature dust hoods on both sides, a table with steel rollers and virtually wear free balanced and quiet running aluminum pulleys. All models are equipped with a magnetic starter (overload protection) and belt guards.
Maximum Part Length:
Pressure Pad Traveling Bar: 96"
Pressure Pad Traveling Bar Contact Wheel Assembly: 80"
Table size: 30" wide X 96" long
Steel table is covered with Russian Cherry wood plywood surface
Motorized vertical table with 28" vertical adjustment
Table weight capacity: 1000 lb
One Abrasive Belt: 6" X 264", 4750 F.P.M.
Pulleys: 10" dia. X 6.25" face
Pressure Pad Traveling Bar
Hand Held Pressure Device
Magnetic starter with overload protection
Belt guards
Pneumatic tensioner
Sanding belt breaking detector
Dust collector outlet: 6" diameter @ 1200 cfm
Compressed air requirement: 90 psi
5 HP T.E.F.C. motor, 1750 rpm
Voltage: 220 or 440 / 3 / 60, 17 amps
OPTIONS
Single Phase 5 HP motor, 220 volts
Enlarge the table to 48"
Vulcanized Rubber Grooved Contact Wheel Assembly
- (for hairlining & fine graining)
Contact Wheel Assembly with Corrugated Stacked Disks
- (for weld seam removal & rough graining)
Variable speed for a 5 HP Motor:
- Allow belt speed between 3300 to 6300 ft./min.
Six (6) Vacuum cups with individual activation switch, to hold parts
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 1SL-MM-713 - BROCAS - FINGER JOINT
PARTE: 1SL-MM-713 - BROCAS - FINGER JOINTMEDIDA 41.1 MM (1-5/8")CARBURO DE TUGSTENOVASTAGO 1/2" (12.7 MM)
AMXmachinery
GARRUCHA 1 TON
PARTE: 1SL-DC-GC1 - GARRUCHA DE CADENA - 1 TONCAPACIDAD 1 TONELADACADENA DE 3 METROS
AMXmachinery
MEDIDOR DE HUMEDAD PARA MADERA – SIN PINS - LIGNOMAT – LIGNO-SCANNER D
PARTE: 2LI-D - MEDIDOR DE HUMEDAD PARA MADERA – SIN PINS - LIGNOMAT – LIGNO-SCANNER DNuevo con garantíaMeasuringRange5-60% dependent upon species setting*Display0.1% resolution for the entire range.SpeciesCorrections71 wood group settings, or simply use specific gravity of the wood, between 0.3 and 1.0 (setting 30-100)GypsumScaleN/AReferenceScale0-99 for non-wood building materialsCalibrationStable calibration not affected by ambient temperature. Calibration is internally checked and auto...
6,900.00 MXN
AMXmachinery
PARTE 12428 - UNIDORA DE CHAPA PARA CENTROS DE TRIPLAY
PARTE: 12428 - UNIDORA DE CHAPA PARA CENTROS
DE TRIPLAY
USADA – BUENAS CONDICIONESAncho útil de trabajo 1300mmLargo de las chapas a obtener 2500mm.Velocidad Variable de trabajo desde 10
hasta 50 ml.Espesor mínimo de unido e chapa 1mm ,
máximo 2.3mm.Unido mediante hilo y hotmelt.Año de fabricación 2019.
Voltaje 380 60 Hz