ID: 1333
Open
Description
PARTE: 2DO-PMC-264-1 – LIJADORA DE BANDA - MESA MOVIBLE – 1 BANDA – MOTOR 5 HP - MESA 30”X 96”
Nueva con garantía
Maximum Part Length:
Pressure Pad Traveling Bar: 96"
Pressure Pad Traveling Bar Contact Wheel Assembly: 80"
Table size: 30" wide X 96" long
Steel table covered with ¾" x 6" pine boards
Table weight capacity: 200 lb
One Abrasive Belt: 6" X 264", 4750 F.P.M.
Pulleys: 10" dia. X 6.252 face
Pressure Pad Traveling Bar
Hand Held Pressure Device
Vertical adjustment: 28"
Magnetic starter with overload protection
Belt guards
Dust collector outlet: 6" diameter @ 1200 cfm
5 HP T.E.F.C. motor, 1750 rpm
Voltage: 220 or 440 / 3 / 60, 17 amps
Opcional: Mesa 48” largo
Video: https://vimeo.com/637956331
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 2SP-S-2415 - TRITURADORA - ASTILLADORA - MOTOR 15 HP - ENTRADA 24” LARGO X 36” ANCHO
PARTE: 2SP-S-2415 - TRITURADORA - ASTILLADORA - MOTOR 15 HP - ENTRADA 24” LARGO X 36” ANCHO PARA MADERA, MDF, PLYWOOD, COMPOSITES, PAPEL, CARTON, ETC.NUEVO CON GARANTIA24" wide cutterhead block, 24" wide x 36" deep inlet hopper.15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.Generates solid material into approximately 3/8" x 1" sizes.A robust fabrication design built for many years of daily, commercial use s...
AMXmachinery
SIERRA CINTA – VOLANTES 36” – 20 HP - CON ALIMENTADOR – STENNER
PARTE: 12227 – SIERRA CINTA – VOLANTES 36” – 20 HP - CON
ALIMENTADOR – STENNER
USADA – MUY BUENAS CONDICIONES
Wheel
Diameter: 36"
Max.
Bandsaw Width: 100mm
Maximum
Depth of Cut: 370mm
Saw
Motor: 20 HP, 230/460v, 3ph
Feed
Motor: 0.55 HP, 230/460v, 3ph
Feed
Speeds: 7.5, 15, 22.5, and 30 m/min (Need to Change Belt)
Table Size: 31" x 37"
AMXmachinery
PARTE: 12405-4 - ENCHAPADORA CANTOS - CURVOS Y RECTOS
PARTE: 12405-4 - ENCHAPADORA CANTOS
- CURVOS Y RECTOS
USADA - BUENAS CONDICIONES
220V, 3 FASES
AMXmachinery
SIERRA MULTIPLE FRAME SAW
2OG-PP-001 – SIERRA MULTIPLE VAIVEN – FRAME SAW – CORTE DELGADONUEVA CON GARANTIASturdy, solid cast iron base and is equipped with a 15kW (20 HP) main motor.Cuts solid wood blocks into glueable slats with minimal saw kerf waste.The machine can run products up to 250mm in height (10”).The Power Plus Frame Saw provides a high performance and quality machine for the production of veneer slats. The machine can be fitted with a custom channel system that will feed up to 5 boards simultaneousl...