ID: 1334
Open
.jpg)
LIJADORA DE BANDA - MESA MOVIBLE – 2 BANDAS – MOTOR 5 HP - MESA 30”X 96”
AMXmachinery
Description
PARTE: 2DO-PMC-264-2 – LIJADORA DE BANDA - MESA MOVIBLE – 2 BANDAS – MOTOR 5 HP - MESA 30”X 96”
Nueva con garantía
Maximum Part Length:
Pressure Pad Traveling Bar: 96"
Pressure Pad Traveling Bar Contact Wheel Assembly: 80"
Table size: 30" wide X 96" long
Steel table covered with ¾" x 6" pine boards
Table weight capacity: 200 lb
Two Abrasive Belts: 6" X 264", 4750 F.P.M.
Pulleys: 10" dia. X 6.252 face
Pressure Pad Traveling Bar
Hand Held Pressure Device
Vertical adjustment: 28"
Magnetic starter with overload protection
Belt guards
Dust collector outlet: 8" diameter @ 2400 cfm
5 HP T.E.F.C. motor, 1750 rpm
Voltage: 220 or 440 / 3 / 60, 17 amps
Video: https://vimeo.com/637956331
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
RELOJ RECTO - GRABADO
PARTE: P-BASE-520-G - RELOJ RECTO - CON RELOJ 3" - MADERA SOLIDA - COLOR CAOBAMadera solida de pinoReloj de 3" diametro (bateria no incluida) Medidas: 6" ancho x 8.5" alto x 2" espesor
AMXmachinery
AUTOMATIC HANGER MACHINE - CRAFT INC - COBRA AHM-01 - PICTURE FRAME MANUFACTURING
PART:
AMX-10055-E - AUTOMATIC HANGER MACHINE - CRAFT INC - COBRA AHM-01 - PICTURE FRAME
MANUFACTURING
USED
– GOOD CONDITION - Sold as is - Where it isBrand:
Craft Inc. from South Attleboro MassachusettsModel: COBRA AHM-01Serial: 079127V, CE36
reels included with approximate 6000 hangers each reelMachine
dimensions: 72” length x 26” wide x 62” height Shipping
dimensions:Machine:
32” width x 79” length x 66” height - wood palletReels:
28” width x 30” depth x 60” he...
AMXmachinery
EXTRACTOR DE TURBINA - DAYTON
PARTE: AMX-12490 - EXTRACTOR DE TURBINA - DAYTONUSADO - MUY BUENAS CONDICIONESBALEROS NUEVOSMedidas totales: 25” ancho x 17”
fondo x 20” altoEntrada redonda: 7”Salida redonda: 5”
Motor: 3 HP, 230/460V, Amp 8.2/4.1,
RPM 3490, Marca Dayton Video: https://vimeo.com/870516485
AMXmachinery
PEGADORA DE SABANAS - FISHER RÜCKLE CROSSMASTER
PARTE: 12160 – PEGADORA DE SABANAS - FISHER RÜCKLE CROSSMASTER
USADA – MUY BUENAS CONDICIONES
Year of manufacture 2008
Opening width mm 2.800
Veneer thickness min mm 0,3
Veneer thickness max mm 1,5
Strip width min mm 50
Strip width max mm 600
Feed rate max m/min 36
Cross splicing machine Yes
Edge gluing Yes
Trimming unit Yes
Rip cut Veneer clipper
Joint Only edge gluing
Controls and software:
SIEMENS SIMATIC PANEL
CE marking Yes
Total con...