Identificador: 1334
Abierta
.jpg)
LIJADORA DE BANDA - MESA MOVIBLE – 2 BANDAS – MOTOR 5 HP - MESA 30”X 96”
AMXmachinery
Descripción
PARTE: 2DO-PMC-264-2 – LIJADORA DE BANDA - MESA MOVIBLE – 2 BANDAS – MOTOR 5 HP - MESA 30”X 96”
Nueva con garantía
Maximum Part Length:
Pressure Pad Traveling Bar: 96"
Pressure Pad Traveling Bar Contact Wheel Assembly: 80"
Table size: 30" wide X 96" long
Steel table covered with ¾" x 6" pine boards
Table weight capacity: 200 lb
Two Abrasive Belts: 6" X 264", 4750 F.P.M.
Pulleys: 10" dia. X 6.252 face
Pressure Pad Traveling Bar
Hand Held Pressure Device
Vertical adjustment: 28"
Magnetic starter with overload protection
Belt guards
Dust collector outlet: 8" diameter @ 2400 cfm
5 HP T.E.F.C. motor, 1750 rpm
Voltage: 220 or 440 / 3 / 60, 17 amps
Video: https://vimeo.com/637956331
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA CINTA - CON ALIMENTADOR - VOLANTES 54” - 100 HP
PARTE: 12385 -
SIERRA CINTA - CON ALIMENTADOR - VOLANTES 54” - 100 HP
USADA - BUENAS
CONDICIONES54" Dia. Wheels with 6-1/2" Face7" x 29'0" blade SizeAir Tensioning with Dial Adj. for Top WheelSelf Centering Feed Works that can also be preset to a sizesix 7" Dia. x 12" High Smooth Feed Rolls (Three
Each Side of Saw Line) all with Individual Adjustment for Aligning with Saw
Blade21" Max. Feed Roll Opening( 12" Outside Sawline,
9" Inside SawlineSteel Weldment Roll Cradle with Chrome Plate...
AMXmachinery
EXTRACTOR CENTRIFUGO BAJA PRESION INDUSTRIAL
PARTE: 1AM - EXTRACTOR CENTRIFUGO BAJA PRESION
Modelo
HP
Volumen
PCM MC/HR
12AI-CB-5-B
1/20
471
800
12AI-CB-6-B
1/10
706
1,200
12AI-CB-7-B
1/2
1,118
1,900
12AI-CB-7-T
12AI-CB-8-B
3/4
1,530
2,60...
AMXmachinery
LINEA DE CARDADO OPEN END
PARTE:
12133 – LINEA DE CARDADO OPEN END
ACONDICIONAMIENTO, PREPARACIÓN, CARDA Y CONTINUACONTACTENOS PARA MAS INFORMACION Y FOTOS
AMXmachinery
INDEX TABLE
PARTE # 11903 – INDEX TABLE – EVANS MACHINERY 4253Very good condition5' x 12' capacityIncluding roller section between panel support railsRails equipped with beveled rollers to transport panel to end stopEnd stop with bump switch to activate panel dropPanel is driven to end stop with powered drive rollerElectric 230 volt, cycle, 3 phase