Identificador: 2008
Abierta
LIJADORA DE BANDA PARA TABLEROS Y LARGUEROS CURVOS DIMENSIONES DE 120 X 240 CMS MOTOR
AMXmachinery
Descripción
PARTE: 12405-7 - LIJADORA DE BANDA PARA TABLEROS Y LARGUEROS CURVOS DIMENSIONES DE 120 X 240 CMS MOTOR
USADA - BUENAS CONDICIONES
220V, 3 FASES
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA ESCUADRADORA VERTICAL - STANDARD-S - CAP. 168” X 66” X 3-1/8”
PARTE: 2ST-STANDARD-S - SIERRA
ESCUADRADORA VERTICAL - STANDARD-S - CAP. 169” X 66” X 3-1/8”
NUEVA CON GARANTIA• Swiss made quality for accuracy and
durability!• Very stable, all welded steel frame suitable
for free-standing or wall-mount installation• Heavy-duty panel support rollers with
integral foot pedal braking system• Convenient, sturdy, two-section mid-shelf
with moveable aluminum fingers allows comfortable working of small parts and ability
to stage material on...
AMXmachinery
LAMINADORA 62" RODILLOS SEGMENTADOS
PARTE # 2EV-0207 – PINCH ROLLER 62” - RODILLOS SEGMENTADOS – EVANS 020762" capacitySegmented bottom roller for countertop operationSafety Gates on In-Feed and Out-FeedSolid Top RollerSplit Bottom RollerFeed Rate: 50 FPMMaximum Width: 62”Maximum Thickness: 2”Work Height: 30-1/2”(Optional Riser Available)Drive Motor: ½ HPElectrical: 120 V, 1 PH, 60 HzAir Requirement: 100 PSIShipping dimensions 85” long X 33” wide X 57” high*Note: Options Listed under 0257 Pinch RollerOptions:- ...
AMXmachinery
PARTE: AMX-10080 - ABANICOS DE PEDESTAL - USO RUDO - INDUSTRIALES - TODO EN METAL
PARTE: AMX-10080 - ABANICOS DE PEDESTAL - USO RUDO -
INDUSTRIALES - TODO EN METAL
USADOS - BUENAS CONDICIONES
USO RUDO - INDUSTRIALES - TODO EN
METAL
PATAS, PEDESTAL, ABANICO Y CUBIERTA
DE PROTECCION METALICOS
MOTOR ½ HP, 115V, 1 FASE
COLOR GRIS - DIAMETRO 30”, 24”
COLOR NEGRO - DIAMETRO 29”
MARCA DAYTON Y OTRAS MARCAS
AMXmachinery
DOUBLE MITER SAW - 45 DEGREES - 12” DIAMETER CAPACITY - CTD D45
PART:
AMX-10079 - DOUBLE MITER SAW - 45 DEGREES - 12” DIAMETER CAPACITY - CTD D45
Used
- Good condition
Two (2) saws fixed at 45° angle (saw heads are adjustable up
to 3°)
(2) motors, 1.5 HP, 208-230/460V, 3 phase, currentle
connected to 220V
3,900 blade RPM
Back fence
2 New On/Off
Switches with magnetic starters
2 Saw blades installed 10” diameter,
Cutting
capacity with 10" blades:
2-1/2" width x 3-1/4" height
Machine capacity up to 12” diameter...