Identificador: 1751
Abierta
Descripción
PARTE: 2CK-E6
Can effectively sand the edges of solid wood or MDF cabinet doors, furniture parts, and stair treads to prepare it for finishing and between coats. The adjustable RPM provides you with full control of the sanding speed for optimum finishing results. The head oscillates up and down and is manually adjustable to utilize the full width of the abrasive. The sanding strips can be exchanged quickly to change between various grits. The back fence can be utilized for straight sanding and can be easily removed for sanding curved components.
- Ideal for sanding the edges of cabinet doors, stair treads, or furniture components.
- Brush abrasive can sand into profiles or break the edges
- Oscillation ensures optimum usage of the abrasive and ensures a quality sanding result
KEY ADVANTAGES
- Adjustable spindle height for maximum usage of the abrasive.
- Adjustable & removable back fence for linear or curved sanding
- Variable speed sanding head
- Magnetic starter with emergency stop button
- Built in dust hood
- Comes with 1 (one) set of 150 grit abrasives
|
DESCRIPTION |
INCH |
METRIC |
|
Sanding head length |
6” |
152mm |
|
Motor power |
½ HP |
|
|
Oscillating stroke |
0.82” |
20mm |
|
Table dimensions |
31.5” x 22” |
800 x 540mm |
|
Table height from floor |
33” |
838mm |
|
Dust port size |
3.5” |
89mm |
|
Machine dimensions |
44” x 34” x 42” |
1118 x 864 x 1067mm |
|
Shipping dimensions |
37” x 30” x 52” |
930 x 750 x 1315mm |
|
Machine weight |
220 lbs |
100 kgs |
|
Shipping weight |
330 lbs |
150 kgs |
|
Electrical requirement |
2.4 amps, 230/3/60 |
|
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
SIERRA MULTIPLE - DIAMETRO DISCOS 14”
PARTE: 2CK-NT-MRS14NFeatures a cast iron frame that houses a variable speed dip chain for premium rip capability. Often referred to as gang rip saws, this machine is fitted with 14″ diameter rip saw blades and can be equipped with power raise and lower, invertor speed control and non marking urethane feed chain for customer specific applications. The stable base paired with first class safety features provides industrial level ripping for softwood and hardwood lumber.MAIN MOTOR HP: 50 HPVOLTAG...
-500x500.png)
AMXmachinery1
PARTE: 2CK-MX350 - ENCHAPADORA DE CANTOS - 29 FPM - 0.4 - 3 MM - PREMILL
PARTE: 2CK-MX350 - ENCHAPADORA DE CANTOS - 29 FPM - 0.4 - 3 MM - PREMILLCapable of applying up to 3mm thick edge tape on cabinet parts and more. The counter rotating pre-milling cutters ensure optimum panel edge quality and squareness which result in a less visible glue joint. It comes equipped with high frequency motors on both the end trim and top & bottom trim. In addition it is equipped with PVC radius scraping and buffing units. User friendly controls and adjustments allow for effi...
-500x500.png)
AMXmachinery1
CORTADORA DE METAL HIDRAULICA
CORTADORA DE METAL HIDRAULICA PARTE: 2GM-HS-0610MD6 foot hydraulic metal shears can cut up to 10 gauge by 72” wide mild steel sheet metal. A hardened shearing blade is installed and pre-gapped ready for buyers to operate upon arrival. Our light duty hydraulic shears are dependable and deliver sharp razor cuts with ease.Taiwan machinesISO 9001 certifiedHD all steel construction for maximum rigidityGerman logic quiet Rexroth hydraulic systemAdjustable stroke ...
AMXmachinery1
CEPILLO 1 CARA - 24 PULGADAS
PARTE: 2CK-P630HVHas a solid steel helical cutterhead with two-sided carbide knife inserts that require no adjustments when changing. With a digital readout and simple PC controller, setting the table height is quick, accurate, and easy. The frame is made from heavy cast iron with known vibration damping resulting in long bearing life and superior cut quality. The planer’s segmented, serrated infeed roll & segmented pressure shoe ensures material is held firmly during the feeding and planing p...