ID: 235
Open
Description
PARTE # 2SM-913003 - LIJADORA DE 2 TAMBORES - 25” DE ANCHO
Sanding Capacity:
Maximum Width (in): 25
Minimum Length (in): 2-1/4, varies per application
Maximum Thickness (in): 6
Minimum Thickness (in): 1/32
Dimensions HxWxD (in): 52 x 42 x 27
Drum: 5 x 25 extruded aluminum
Drum Speed: 1740 RPM
Dust Hood: Steel hood w/ two 4" vacuum ports, hinged at back, 1000 CFM recommended
Ball bearings (1"): 4, sealed and permanently lubricated
Conveyor Motor: 43 in.-lb. torque, direct drive D.C. motor, infinitely variable 0-20 FPM
Drive Motor (TEFC): 3 HP
Power Requirements: 220 V, 1 Ph
Shipping Weight (lbs): 680 (2 boxes)
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 12598 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZL-34 DELTA
PARTE: 12598 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZL-34 DELTAUSADA – BUENAS CONDICONESFISHER+RUCKLE FZL-34 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 3400 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 1998400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead times durin...
AMXmachinery
SIERRA CINTA – VILANTES 36” – CON ALIMENTADOR – TRI STATE
PARTE: 12225 – SIERRA CINTA – VILANTES 36” – CON ALIMENTADOR
– TRI STATE
USADA – MUY BUENAS CONDICIONES
8,500 PPM
blade 2”
max.17’4”,
8”max. material
width, variable speed feed works 6’x6’ rolls
Motor principal: 20 HP, 230/460 V, 3 PH
Alimentador: ½ HP
AMXmachinery
ESCOPLO OSCILANTE 2 MESAS
PARTE: 2TA-CM-100 - 3YC-YOM-120 - ESCOPLO OSCILANTE - 2 MESAS - AMX MACHINERYNueva con garantiaA faster rectangular mortise machine provides variable oscillating speed at 7 ~ 200 strokes per minute.Two working tables built in both side of the machine to double the production for high efficiency mortising operation.Pneumatic hold down clamps and pneumatic depth movement for smooth finish.Fully automatic mortise produce cycles simply by stepping on the foot pedal.Hydraulic pistons for drillin...
AMXmachinery
PARTE: 12438 – SIERRA OPTIMIZADORA – WEINIG DIMTER OPTICUT S90
PARTE: 12438 – SIERRA OPTIMIZADORA
– WEINIG DIMTER OPTICUT S90
USADA – MUY BUENAS CONDICIONES
Incoming
Lengths up to 248" (20')
Widths
3/4" Min to 14-1/4" Max
Thickness
3/8" Min to 4" Max
Automatic
Length Cutting: 800 Lengths Distributed onto 16 Cutting Lists can be
Stored. Input up to 200 Lengths per Cutting List is Possible
Saw
Motor 10HP
Saw
Blade Diameter 20-1/2"
Swiveling
Positioning Pusher Including Laser Photo-eye for...