Identificador: 350
Abierta
ID de articulo : # 350 se ha agregado a su lista de deseos.
Descripción
PARTE # 2OM-T2010NC - SIERRA OPTIMIZADORA - ALTA PRODUCCION
PARTE # 2OM-T2020NC - SIERRA OPTIMIZADORA - ALTA PRODUCCION
PARTE # 2OM-T2030NC - SIERRA OPTIMIZADORA - ALTA PRODUCCION
NUEVA CON GARANTIA
Caracteristicas:
Last Generation automatic programmable cut-off saw for optimized cutting of wood stock and defect removal.
Particularly suitable for medium production requirements.
The maximum feed speed of 400 FPM makes of the T 2010 NC a compact, flexible and highly productive system.
The set of 5 top pressure rollers are able to compensate for some dimensional variations of the stock ensuring an accurate positioning.
The machine is equipped with a PC computer capable of performing eleven work cycle programs.
The numerical control is able to store cutting lists with lengths divided in several different grades and the relevant quantity of parts.
Cutting lists can be input direct for the NC keypad ,via a 3 1/2" diskette, with direct serial connection to a remote PC or directly through the network.
The onboard computer with 15" color monitor provides the following information:
- Stock in cubic feet, required to produce the number of pieces in each list.
- Number of pieces produced of each length.
- Amount of stock in cubic feet divided into: first, second, third grade and waste
- Cubic feet required to produce remaining parts.
- Yield as a percentage of the total
- Print out of all the above data to a parallel printer (optional).
The system can perform simulated cutting to verify the result before processing the wood and allowing the user to decide whether to use the chosen parameters for the required production or change it.
The T 2010 NC can cut and handle up to 3 different grades within the same cutting list or 5 grades with optional horizontal camera.
AVAILABLE OPTIONS:
- Infeed Roller Tables.
- Width Scanner.
- Two Sided Grading Stations.
- 2nd horizontal reading Camera. (for up to 5 grades).
- Double sided CNC Workpiece Sorter.
- Conveyor Belt for Off Cuts.
- Motorized loading system.
- Sorting systems with kickers.
Technical Data
|
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 3NN-ULTIMATE2800 - ARMADORA DE SABANAS DE CHAPA
PARTE: 3NN-ULTIMATE3400 - ARMADORA DE SABANAS DE CHAPA – 3400 MMPARTE: 3NN-ULTIMATE2800 - ARMADORA DE SABANAS DE CHAPA – 2800 MMMachine SpecificationModelUltiMate 3400UltiMate 2800Veneer Strip Length450 ~ 3400 mm450 ~ 2800 mmVeneer Strip Thickness0.25 ~ 1.5 mm0.25 ~ 1.5 mmVeneer Strip Widthmin. 75 mm (85 mm for 1 strip)min. 75 mm (85 mm for 1 strip)Production Speedup to 15 ~ 20 cycles/min.up to 15 ~ 20 cycles/min.Electric Powerapprox. 28 kwapprox. 23 kwCompressed Air5 bar5 barDimensions ...
AMXmachinery
POSTFORMADORA
PARTE # 2EV-0138 - POSTFORMADORA - 8 PIES LARGO 1 LADO - EVANS 0138 All Form 8' capacity- 220 Volt, 1 Ph., 60 Hz, 20 amp. Or 380 Volt, 3 Ph. 50 Hz- 100 PSI air required 1 CFM (2 CFM if using vacuum clamp)- Standard Features: - Overhead clamp and vacuum system- Forming length capacity 100"- 1 ½” maximum forming radius. (3” thick material)- Foot print 4' wide X 11' long- Thermostatically controlled heater, ambient to 500 degrees Fahrenheit- Integrated timer. I...
AMXmachinery
(2) COMPRESORES DE AIRE CAPACIDAD DE 500 LTS MOTOR DE 5 HP TANQUE HORIZONTAL
PARTE: 12405-3 - (2) COMPRESORES DE
AIRE CAPACIDAD DE 500 LTS MOTOR DE 5 HP TANQUE
HORIZONTAL
USADA - BUENAS CONDICIONES
220V, 3 FASES
AMXmachinery
PARTE: 1SL-DC-EB4G - ENCHAPADORA DE CANTOS - AUTOMATICA - 4 GRUPOS
PARTE:
1SL-DC-EB4G - ENCHAPADORA DE CANTOS - AUTOMATICA - 4 GRUPOSNuevo con garantía
5.3 HP EN TOTAL, 220V, 3 FASES
POTENCIA: 5.3 HP (4000 W)
VOLTAJE: 220V, 3 FASES, 60HZ
POTENCIA: 3.96KW
MIN LONGITUD DEL PANEL: 80 MM
MIN ANCHO DEL PANEL: 12 - 45 MM
ESPESOR DE CHAPA: 0.4 - 3 MM
VELOCIDAD DE ALIMENTACION: 9 M/MIN
PRESION DE AIRE REQUERIDA: 6 BAR
DIMENSIONES: 1.96 M X 76 CM X 1.22 M
PESO: 450 KG GRUPOS:- ENCOLADO- RETESTADOR- PERFILADOR- PULIDOR