Identificador: 1693
Abierta
.jpg)
Descripción
PARTE: 2CK-PH48-2 - MESA DE TIJERA - 4' x 8'
Is strongly built with a massive steel frame that provides maximum durability and is capable of lifting up to 4400 lbs. It is hydraulically operated and controlled by a foot pedal for operator convenience. The PH48-2 is adjustable in height from 14” up to 71”. It is ideal for staging material for feeding into various woodworking machines like sanders, glue spreaders, panel saws, ripsaws, and more.
- 4400 lifting capacity
- 4’x8’ deck size
- 14” to 71” lifting capacity
- Robust welded steel frame
- Powerful 2HP hydraulic motor for raising & lowering the scissor lift
- Convenient foot pedal operation
|
Deck Size |
47” x 94” (1200 x 2400 mm) |
|
Lowered Height |
14” (350 mm) |
|
Raised Height |
71” (1800 mm) |
|
Travel |
58” (1470 mm) |
|
Motor |
2 HP |
|
Capacity |
4400 lbs (2000 kgs) |
|
Electrics |
115 Volt – Single phase |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery1
CEPILLO 2 CARAS - 30 PULGADAS
PARTE: 2CK-GT760ARDHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system allowing it to act like a jointer to flatten the board prior to being planed to an accurate thickness with the top head.Spring loaded conveyor pin system ensures material is passed over the bottom cutterhead to resulting in a flat...
AMXmachinery1
SIERRA ESCUADRADORA - 5 PIES
PARTE: 2CK-P30Is the ideal solution for customers looking for the precision and convenience of a sliding table saw but have limited floor space and smaller cutting requirements. The machine has a precision sliding table which runs on ball bearings and hardened steel guide strips. It is equipped with individual motors for the main saw blade (5 HP) and scoring blade (¾ HP). The blade height and tilt is manually adjusted by means of individual handwheels. The angle of the blade is displa...
-500x500.png)
AMXmachinery1
ENCHAPADORA DE CANTOS MANUAL
PARTE: 2MK-CBC FLEX - ENCHAPADORA DE CANTOS MANUALIs perfect to apply edge banding tape to concave and convex curved pieces. Being super portable and weighing only 21 pounds, this machine is ideal for extensive jobs. It has a digital temperature control and adjustable feeder speed.Technical InformationGlueGranulated Hot-MeltGlue Temperature130° to 180º CMotor specs1 Phase 127 V 5.5 A 700 WTape thickness0.4 mm – 1 mmMax. tape width0-35/64” to 1-57/64”Feeder speed0 to 19 ft/minWeight21 Lbs
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 4' X 12GA
DOBLADORA DE METAL 4' X 12GA PARTE: 2GM-0412EThis machine has a 2HP Motor, rated at 220V/440V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is powe...