Identificador: 3014
Abierta
Descripción
PARTE: 12727 - MONTACARGAS - GAS - HYSTER
MODELO: H300A
SERIE: A019D01833N
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...
AMXmachinery
PARTE: P-VAR-035 - CINTA DOBLE CARA
PARTE: P-VAR-035 - CINTA DOBLE CARA - ½” ANCHO x 50 MMedidas:½” ANCHO x 50 METROS
AMXmachinery
PARTE: 12430 - SISTEMA FINGER JOINT - WEINIG GRECON
PARTE: 12430 - SISTEMA FINGER JOINT - WEINIG GRECON
USADO
- MUY BUENAS CONDICIONESWEINIG GRECONMOD. PROFI JOINT- min/max length of raw
material 150-700 mm- min/max working
thickness 20– 50 mm- min/max working width
35 - 170 mm- min/max final working
length 2250 mm - 4500 mm- type Cola Pvac - Complete with 1 knife
set- Volt. 400/50- year 2012- reconditioned by
Weinig Service in 2022
- CE RULES
AMXmachinery
PARTE: 3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
PARTE:
3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
NUEVO CON GARANTIAOne way feeding onlyWork width: 250 mm (25 degrees), 55 mm (60 degrees)Work Height: 180 mm
Knife bias angle: 0 - 60 degrees variableFeed speed: 88 m/min (60hz), 73 m/min (50hz)Feed motor : 2.2Kw x 2 motors
Head up/down motor: 0.2 Kw2 knife stocks on top and bottom surfacesKnife type: Changing blade typeKnife size: 335 length x 66 x 8 mmAccessories: Changing blades and standard toolsMachine size: (WxLxH...