Identificador: 1076
Abierta
Descripción
PARTE: 12059 - SIERRA MULTIPLE - DE VAIVEN
Usada - Muy buenas condiciones
Features and Specifications:
Saw capacity of 6" width x 8" vertical capacity.
Minimum working 2” high X 12” long.
Main drive motor to saw frame is 30HP 3PH, wired 460 V
Servo drive system to feed works is 1/4HP 3PH
Blower to saw frame rack for added cleaning value is 3HP 3PH
Body of frame saw is (2) sections allowing for fast access to the saw frame
Saw blade speed is fixed at 550RPM
Dust extraction requires min 3000 CFM and is arranged with (4) 5" ports
Blade size is standard with 500mm L x 40mm W x 0.9mm
Body in stellite or TCT tip
Digital electronic oiling system provides proper lubrication to the saw frame guides and vertical rail system which allows optimum cooling and long term durability
(4) guide blocks are thermo- censored to allow auto shut-off of machine should possible heat buildup occur.
Machine dimensions 122” L X 40” WX, 79” H weight 7100 lbs
Machine was new in 2007.
Good condition.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA ESCUADRADORA 1600 MM
PARTE # 2TA-TS-P1600MA - SIERRA ESCUADRADORA - 1600 MMHeavy duty construction provides vibration free operation. Easy to set up and adjust.Manual raise, lower and tilt of main blade and scoring saw.Scoring unit provides clean, accurate, chip free cutting, ready for edge banding.Sealed main shaft bearings (lubricated for life) with vibration dampening system.Highly accurate, freely moving sliding table with wear resistant guide rails and rollers.Specially designed roller carriage, utilizing alumi...
AMXmachinery
PARTE: 1SL-DC-WJ8 - CANTEADORA DE 8" - 2 HP
PARTE: 1SL-DC-WJ8 - CANTEADORA DE 8" - 2 HP NUEVA CON GARANTIAMOTOR: 2 HP, 110/220V, 60 Hz, MONOFASICOANCHO MAXIMO DE DESBASTE: 8"MAX. PROFUNDIDAD DE CORTE: 8" X 1/8"; 4" X 1/4" Y 2" X 1/2"INCLINACION DE LA GUIA: 45 Y 90 GRADOSDIMENSIONES DE LA MESA ENTRADA: 23-1/4" X 9-1/4"DIMENSIONES DE LA MESA SALIDA: 27-3/8" X 9-1/2"DIMENSIONES DE LA GUIA: 34" X 4"ALTURA DE LA MESA: 32"CANTIDAD DE CUCHILLAS: 3 PIEZASPESO: 138 KGSTIPO DE EMPAQUE: 1 CAJA
AMXmachinery
PARTE: 12654 - LIJADORA - CALIBRADORA - BANDA ANCHA – 2 LIJAS - 36” ANCHO
PARTE: 12654 - LIJADORA - CALIBRADORA - BANDA ANCHA
– 2 LIJAS - 36” ANCHO
Usada
Motor principal: (2) 5 HP, conectada 440V, 3 fases
Motor avance: 3 HP, conectada 440V, 3 fases
AMXmachinery
LAMINADORA DE PANELES - COMPACTA - FOIL
PARTE: 4VE-VFL-1400-CRL -
LAMINADORA DE PANELES - COMPACTA - FOIL
Nueva con garantía
COMPONENTES:PARTE: 4VE-VCH-1300-L3-NABI -
TRANSPORTADOR CON 4 CALENTADORES INFRAROJOS Y CEPILLONO
STANDARD SPECIFICATIONS QTY1
Silicone
coated pipes (with anti static system ) 202
Panel
guiding system (Adjustable from the center) 13
The
belt drive s...