Identificador: 1718 Abierta

PARTE: 12352 – TRITURADORA - CARTON – CON TRANSPORTADOR – BLOAPCO

PARTE: 12352 – TRITURADORA - CARTON – CON TRANSPORTADOR – BLOAPCO

AMXmachinery

Contacte al Vendedor

Descripción

PARTE: 12352 – TRITURADORA - CARTON – CON TRANSPORTADOR – BLOAPCO

SIN COMPACTADORA

USADO EN BUENAS CONDICIONES

DESIGNED TO SHRED CORRUGATED SHEETS AND BOXES, OVERSIZED FLAP CUTS AND DIE PRESS WASTE TO SMALL IRREGULAR PIECES...APPROXIMATELY 5" X 8" PIECES. BOTTOM DISCHARGE OUTLET FEEDS SHREDDED MATERIALS INTO CHUTES BINS, COMPACTORS, OR PNEUMATIC SCRAP HANDLING SYSTEMS. IT HAS THE CAPACITY TO HANDLE 300 POUNDS PER HOUR PER HORSEPOWER WHEN HANDLING CORRUGATED BOARD MATERIALS.

Pago y Devoluciones

Forma de pago: Visa/Mastercard/American Express, Transferencia/Deposito Bancario

Publicar mensaje

Ingresar to ask the seller a question.

AMXmachinery

PRENSA ARMADORA DE SILLAS

PARTE: 3YC-YC-A6 - PRENSA ARMADORA DE SILLAS Nueva con garantía Master pump motor power: 5 HP Oil capacity of master pump: 80 Litres Working pressure: 80÷100 bar Total horsepower: 5 HP Working air pressure: 6 kg/cm² Machine dimensions (LxWxH): 2250 x 2020 x 1210 mm Packing dimensions (LxWxH): 2020 x 2140 x 1230 mm Net weight / Gross weight: 1400 kg / 1500 kg

AMXmachinery

MOULDER CUTTER HEADS - LENGHTS 2.25”, 3”, 4”, 5”, 6” - BORE 1-13/16” - BORE 2-1/8"

PART: 12305-E - MOULDER CUTTER HEADS - LENGHTS 2.25”, 3”, 4”, 5”, 6” - BORE 1-13/16” - BORE 2-1/8"WITHOUT BUSHING - BORE 2-1/8" USED - VERY GOOD CONDITIONS North American Gladu hydro-lock 6 wing 20 degrees Interior diameter (bore): 1-13/16” External diameter: 6” (150 mm) Lenght 2-1/4” (57 mm) Lenght 3” (75 mm) Lenght 4” (102 mm) Lenght 5” (130 mm) Lenght 6” (152 mm)

AMXmachinery

SIERRA INGLETEADORA – DOBLE – CTD

PARTE: 12105 – SIERRA INGLETEADORA – DOBLE – CTDUsada – Buenas condiciones230/460V, 60 Cy, 3 PhaseMotor: 3 HP, 3450 RPM.09 Cubic Meters At 5.2 KG/ CM Squared Based on 10 Strokes per MinuteSaw Heads Swivel From 90 Degrees-45 Degrees Toward Each-Other with Degree Markings and Stops at 90 Degrees-45 Degrees8' Centers, Traveling Right Hand Carriage On Rack and PinionSaw Arms-Pivot Brackets are Cast Iron10" Blade-2" (51MM) x 4-7/8" (124MM)12" Blade-2.5" (64MM) x 5-3/8 (136 MM)Weight: 2000 LBS...

AMXmachinery

CALDERA - HURST HYBRID 200, 300, 600 HP

PARTE: 12319 - CALDERA - HURST HIBRIDAS 200, 300, 600 HP USADAS - BUENAS CONDICIONES Hurst Hibrida 600 HP 150 PSIHurst Hibrida 200 HP 150 PSI Hurst Hibrida 300 HP 150 PSI Each system should include (email for specifics): Hurst Hybrid Vessel Hurst Boild Furnace with cast grates Hurst underfeed stoker system Hurt Metering conveyor system Overfire air combustion fan Underfire air combustion fan Hurst combustion air preheater Access platform...

Ver todos