Identificador: 2036
Abierta
Descripción
PARTE: 12420 – SIERRA OPTIMIZADORA – DIMTER WEINIG OPTICUT 260
USADA – MUY BUENAS CONDICIONES
Year of Manufacture: 2018
Condition: Excellent
Electric: 460 Voltage 60 Cycle 3 Phase
GREAT CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE.
Working dimensions:
Cross section
min./max 0.48"- 10.23" width; .25" - 3.15" thickness.
Min. part length 5.5" cut.
Length min/max 15.75"- 16'0".
Motor: 10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.
Saw: Blade dia. 20": auto waste gate for waste: Length measurement by flourscent camera.
Software: OptiCom Pro controller with 15" screen: Optimization of (3) grades.
Infeed/Outfeed: 16' Infeed with (2) marking stations; 33' outfeed with 5 kickers for length sort.
Note: Machine has been dismantled and packaged by Dimter tech.
Seller indicates less than 1000 hours on the machine.
Machine available to ship immediately!
Weight: 8000 lbs
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12553 - SIERRA TRONZADORA - 5 HP - GRUTTER
PARTE: 12553 - SIERRA TRONZADORA - 5 HP - GRUTTERUSADA
- BUENAS CONDICIONES
AMXmachinery
PARTE: 12548 - EMBALADORA - VERTICAL - 30” X 60” - CARTON - 67” ALTURA ABERTURA
PARTE: 12548 - EMBALADORA - VERTICAL - 30” X 60” - CARTON - 67” ALTURA ABERTURA
USADA - BUENAS CONDICIONES
Motor 10 HP
AMXmachinery
JUEGO DE 4 CUCHILLAS - PARA BASTONERA HAWKER
PARTE: 1HA-0001 - JUEGO DE 4 CUCHILLAS - PARA BASTONERA HAWKERPARA BASTONERA MODELO HAWKER 500, HAWKER 1500, HAWKER 2000, ETC.MEDIDAS: 6 MM ESPESOR X 55 MM ANCHO X 100 MM LARGO
AMXmachinery
T-EDGE APPLICATOR
PARTE # 2EV-1050 - T-EDGE APPLICATOR - EVANS 1050 T-Edge Applicator- 220 volt, 1 Ph., 60 Hz. Or 220 Volt 1 Ph., 50 Hz.- Standard Features:- Hammer ½ hp motor- Pneumatic corner notching- Electric cutoff ½ hp motor- 3" Dim. Saw blade 8,000 RPM- 80 PSI Required- Crated weight 600 LBS.- Shipping dimensions 53” long X 40” wide X 50” high