Identificador: 2058
Abierta
Descripción
PARTE: 12420 – SIERRA OPTIMIZADORA – WEINIG DIMTER OPTICUT S50
USADA – MUY BUENAS CONDICIONES
Voltage: 440/3/60
Year: 2013
4" x 12" wide max. board capacity 14` material capacity infeed & 8` outfeed table Loading bars attached to front of infeed table Equipped with 9 HP arbor motor, 1.5 HP pusher bar servo motor, 197 FPM max. feed speed; Servo controlled pusher arm travels full length of board, measures, positions and feeds board into saw; capable of single-piece & pack cutting modes. Top and side pneumatic clamping of work piece(s) during cut cycle Features: 12" max. board width cap., 3/8" x 3/4" min. to 3-15/16" max. board thickness, max. infeed material length 17`4", cuts softwood or hardwood
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ABANICO DE TECHO INDUSTRIAL - DIAMETRO 381 CM
PARTE: 2PR-500 - ABANICO DE TECHO INDUSTRIAL - DIAMETRO 381 CM
Nuevo con garantía~ Input: Single Phase 220V @ 10 Amps OR Three Phase 230V @ 5 Amps
~ Speed control via VFD which also converts incoming power to 3
phase for the motor
(This allows us to use 3
phase Inverters as well if needed)
~ 12.5’ Diameter @ 100 RPM
~ 80-120’ Diameter cooling coverage
~ The industries shortest ceiling drop @ 25” utilizes a
horizontally mounted motor to save precious ceiling he...
AMXmachinery
PAMBACERA NEUMATICA
PARTE: 12405-8 - PAMBACERA
NEUMATICA
USADA - BUENAS CONDICIONES
220V, 3 FASES
AMXmachinery
TORNO COPIADOR – TORREDA PA 1200-E
PARTE: 12726 - TORNO COPIADOR – TORREDA PA 1200-E
USADO - MUY BUENAS CONDICIONES
CAPACIDAD 48”
AMXmachinery
EXTRACTOR DE TURBINA - MOTOR 1 HP - S&P
PARTE:
AMX-10048 - EXTRACTOR DE TURBINA - MOTOR 1 HP - S&P
USADO - MUY BUENAS CONDICIONES
MARCA S&P
MODEL: CSB-1300
MOTOR 1 HP, 127/220V, 1 FASE, 60 HZ
AMPS: 17.3 / 9.5
3535 RPM
VOL. 1300 M3/H
HECHO EN MEXICO
ENTRADA: 5-1/2” DIAMETRO
SALIDA RECTANGULAR: 5” ALTO X 4” ANCHO
MEDIDAS TOTALES: 46 CM ANCHO X 38 CM FONDO X 57 CM ALTO