Identificador: 2058
Abierta
ID de articulo : # 2058 se ha agregado a su lista de deseos.
Descripción
PARTE: 12420 – SIERRA OPTIMIZADORA – WEINIG DIMTER OPTICUT S50
USADA – MUY BUENAS CONDICIONES
Voltage: 440/3/60
Year: 2013
4" x 12" wide max. board capacity 14` material capacity infeed & 8` outfeed table Loading bars attached to front of infeed table Equipped with 9 HP arbor motor, 1.5 HP pusher bar servo motor, 197 FPM max. feed speed; Servo controlled pusher arm travels full length of board, measures, positions and feeds board into saw; capable of single-piece & pack cutting modes. Top and side pneumatic clamping of work piece(s) during cut cycle Features: 12" max. board width cap., 3/8" x 3/4" min. to 3-15/16" max. board thickness, max. infeed material length 17`4", cuts softwood or hardwood
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
TALADRO MULTIPLE HORIZONTAL
PARTE # 2TA-BR-52 – TALADRO MULTIPLE HORIZONTAL DE 1 LADO – 50” LARGONew with warrantySuitable and affordable for industrial and small workshop use.Capable of using "multiple drill head" for the drill distance less then 2".Easily adjust the drill position and add more drill spindles.Pneumatic clamp and drill head travel operated by foot pedal, hands free.Pneumatic and hydraulically stroke control for max. drilling power.Each spindle can be horizontally adjusted in position quickly.Cast iro...
-500x500.jpg)
AMXmachinery
PARTE 12630 - CONTORNEADORA - BALESTRINI - C70-N
PARTE
12630 - CONTORNEADORA - BALESTRINI - C70-N
USADA – BUENAS CONDICIONES
AMXmachinery
PARTE: 2CK-P20HV - CEPILLO - 1 CARA - CAPACIDAD 20” ANCHO - 5 HP - CABEZAL ESPIRAL
PARTE:
2CK-P20HV - CEPILLO - 1 CARA - CAPACIDAD 20” ANCHO - 5 HP - CABEZAL ESPIRAL
Nuevo con garantía230/1/60
electrics - 1 Fase
230/3/60
electrics) - 3 Fases
DESCRIPTION
SPECIFICATION
Maximum planing width
20″
Maximum planing thickness
8-5/8″
Feed speeds (2)
20 & 30 FPM
Main motor
5 HP
Cutterhead diameter
3-1/...
AMXmachinery
MOLDURADORA 5 CABEZALES
PARTE # 12WG-UNIMAT 217 - MOLDURADORA - 5 CABEZALESMOLDURADORA AUTOMATICA5 CABEZALESCARACTERISTICAS GENERALES:KW (HP) rpm Tool cutting circle1 - 7,5 (10) with Electronic Brake 6000 5“ – 5-11/16“2 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“3 - Joint Motor together with Right 6000 5“ – 7-7/8“4 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“5 - 7.5 (10) with Electronic Brake 6000 5“ – 7-7/8“ Tool arrangement BRLTBWorking width 3/4“ – 9“Working height 5/16...