Identificador: 2048
Abierta
Descripción
PARTE: 12429 - ESPIGADORA DOBLE DE CADENA - 136”
USADA - BUENAS CONDICIONES
Piece Size: 10" - 136"
Number of Heads: 8
Motor: 16"
Electrical Characteristics: 480 Volts / 3 Phase / 60 Cycles
Equipped With:
Complete Electrical Controls W/Operator Control Station
Overall Dimensions: 172" L-R x 122" F-B x 68" High (est.)
Weight: 15,000 lbs. (est.)
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
RESISTENCIA ENSAMBLADO ARRIBA
PARTE: 2EV-01092.1 – ENSAMBLADO RESISTENCIAS – OVERHEAD HEATERCon 4 clips SS para colgadoresTamaño paquete 166” x 6” x 6”
AMXmachinery
SIERRA ESCUADRADORA VERTICAL - ELCON
PARTE: 12310 -
SIERRA ESCUADRADORA VERTICAL - ELCON
USADA - MUY BUENAS
CONDICIONES
YMFG: 2005
Voltage: 230V 60Hz 3Ph
7-1/2 HP 4,200 RPM motor; 163" horizontal cutting
capacity; 72" vertical cutting capacity; 12" blade capacity; SIKO
digital readout with 2 meters (78.75") magnetic band installed for
horizontal positioning of the saw head; rigid welded box steel frame with (4)
vertical cutting positions; round upper guide rail with concave bearings for
smooth operation; equipped...
-500x500.jpg)
AMXmachinery
PRENSA ENSAMBLADORA FINGER JOINT
PARTE: 2TA-SFJ-4500A - PRENSA
ENSAMBLADORA FINGER JOINTFeatures:
Very efficient automatic
machine that performs three functions:
Jointing of
sectional sticks which have been glued
Cutting the jointed
sticks to desired length
Final assembly is
securely pressed by powerful hydraulic system
Then the jointed
sticks be fed out regularly
Auto power feeder
for fast feeding and auto stops at the desired length to be cut.
Furnished with
cut-off saw as standard equipment for c...
AMXmachinery
PARTE: 2PG-F-130 – HORNO PARA CERAMICA, VIDRIO, METALES – 25 LITROS
PARTE: 2PG-F-130 – HORNO PARA CERAMICA, VIDRIO, METALES – 25 LITROS
Nuevo con garantía
Temperatura Máxima: 926 grados centígrados
2400 watts, 20 Amps
Medidas interiores: 279 mm ancho x 279 mm fondo x 330 mm
alto You can make figurines up to 12” tall in the
F-130. Anneal large glass beads and marbles. Raise the spring-loaded
vertical-drop door to insert a glass figurine with a punty rod. Lower the door.
The punty rod will extend outside the firing chamber through the s...