Identificador: 2077
Abierta
Descripción
PARTE: 12439 - CEPILLO 2 CARAS - ANCHO 25” - CANTEK
USADO - EN BUENAS CONDICIONES
Manufactured in 2015
• 50.5 Total HP
• Spring loaded conveyor pin system
• Spiral insert knife cutterheads with
two sided solid carbide knives
• Digital electronic thickness
adjustment
• 25” Wide x 8” thick capacity
• Inverter variable feed speeds
• Sectional chip breaker and feed roller
before top head
• Removeable bottom head for knife change
• Chain feed drive
• Auto conveyor lubrication
• New replacement cost over $36,000.00
• Currently in storage, will load on truck
• Good condition, As taken from service
Maximum working width 25″
Maximum working thickness 8″
Minimum working thickness 0.315"
Minimum workpiece length 12.2″
Bottom head motor 20 HP
Top planing head motor 25 HP
Feed motor 5 HP
Table elevation motor 1/2 HP
Cutterhead diameter 4"
Knife dimensions 30mm x 12mm x 1.5mm w/ bevels (96 pcs per head)
Cutterhead speed 5400 RPM
Feed speed (variable) 26-80
FPM Dust ports 2 @ 6”
Table dimensions 27" x 103" (32" from the floor)
Machine voltage
460/3/60 = 63 amps
230/3/60 = 125 amps
Prewired 460
Volt Machine dimensions (LxWxH) 105″ x 45.1″ x 67.7″
Net weight 6600 lbs
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ENCHAPADORA DE CANTOS PORTABLE - CON CALDERIN - RECTOS Y CURVOS
PARTE: 2MK-FLEX - ENCHAPADORA DE
CANTOS PORTABLE - CON CALDERIN - RECTOS Y CURVOSNUEVA CON GARANTIAGlue: Granulated Hot-Melt Low TemperatureGlue Temperature: 130º to 180º CTape height: 0-35/64” to 1-57/64”Tape thickness: 0.3 mm - 1 mmFeeder speed: 0 to 19 ft/minPower: 700 WMotor: 1 PhaseVolts/Amps: 127 V - 5,5 A or 220 V - 2,5 AWeight: 21 LbsPerfect for bonding edge tapes to curved pieces.The hand-held is perfect to applying edgebanding to concave and convex curved pieces. It works with...
AMXmachinery
MESA PARA TRANSFERIR TABLEROS ENTRE ESPIGADORAS DOBLES DE CADENA
PARTE: 2TA-SET-TRANS –
MESA PARA TRANSFERIR TABLEROS ENTRE ESPIGADORAS DOBLES DE CADENA
Nueva
con garantíaDiseñada
a la medida para transferir material continuamente entre 2 espigadoras dobles
de cadenaTableros,
puertas, etc.
Aumenta
la eficiencia y disminuye o elimina los manejos manuales
Video: https://vimeo.com/639803360
AMXmachinery
PARTE: 12173 - DOBLADORA DE TUBOS – HIDRAULICA - CAPACIDAD DIAMETRO 4-1/2”
PARTE: 12173 - DOBLADORA
DE TUBOS – HIDRAULICA - CAPACIDAD DIAMETRO 4-1/2”
Usada – Buenas
condiciones, Revisada y Checada
Capacities:
Non-ferrous tubing:
4.5" x .17" - Y.P. to 25,000 PSI
Mild steel tubing:
4.5" x .11" - Y.P. to 35,000 PSI
Stainless steel tubing:
4.5" x .065" - Y.P. to 60,000 PSI
Steel pipe: 3.5" x .24"
schedule 80
Maximum radius:
18"
Tube length over mandrel...