ID: 2223
Open
Description
PARTE: 12507 - CENTRO DE MAQUINADO VERTICAL – CNC – HASS GR-512
USADO – BUENAS CONDICIONES
2006 HAAS GR-512
6" Z-AXIS COLUMN RISER, 10,000 RPM SPINDLE
RENISHAW PROBING SYSTEM
ONLY 2,200 SPINDLE HOURS
IN PLANT, UNDER POWER, AVAILABLE IMMEDIATELY
Specifications:
TABLE LENGTH 146"
TABLE WIDTH 53"
TABLE CAPACITY 6,000 lb
X-AXIS TRAVEL 144"
Y-AXIS TRAVEL 61"
Z-AXIS TRAVEL 11"
SPINDLE SPEED 10,000 RPM
SPINDLE MOTOR 15 hp
SPINDLE TAPER CAT 40
TOOL CAPACITY (ATC) 10
Equipped With:
Z-AXIS COLUMN RISER (6")
RENISHAW PROBING SYSTEM
10,000 RPM SPINDLE
COORDINATE ROTATION & SCALING
SPINDLE ORIENTATION
RIGID TAPPING
MACROS
COOLANT SYSTEM
** AS OF OCTOBER 2023, SPINDLE TIME - 2,279 HOURS
** MACHINE CUT PRIMARILY ALUMINUM & SOME PLASTIC
** IN PLANT, UNDER POWER, AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: AMX-10164 - EXTRACTOR DE PARED - EN ALUMINIO - 19” ANCHO X 19” ALTO X 16” FONDO
PARTE: AMX-10164 - EXTRACTOR DE PARED - EN ALUMINIO -
19” ANCHO X 19” ALTO X 16” FONDO
USADO - MUY BUENAS CONDICIONES
MARCA: FLOAIRE
MODELO: DR12H
MEDIDAS: 19” ANCHO X 19” ALTO X 16”
FONDO
MOTOR: 0.18 HP, 115V, 1 FASE, 60 HZ
FLA: 2.0Video: https://vimeo.com/870538960
AMXmachinery
PARTE: 12321 - DOBLADORA DE CORTINA - 6'6" x 10 GA
PARTE: 12321 - DOBLADORA DE CORTINA
- 6'6" x 10 GA
USADA - BUENAS CONDICIONESModel no. QHD-6020Bending capacity:
6'6" x 10 ga. mild steelTonnage
capacity: 70
tonsOverall length of bed & ram: 80"Distance between housings: 61"Stroke:
6.3"Open
height:
12.2"Throat
depth:
13"Width of
bed:
4.9"Speeds
approx....
AMXmachinery
PARTE: 1SL-DC-PB12 - DOBRADORA DE TUBO HIDRAULICA DE 12 TONS
PARTE: 1SL-DC-PB12 - DOBRADORA DE TUBO HIDRAULICA DE 12 TONSNueva con garantiaPara tubo de ½”, 3/4”, 1”,1-1/4”, 1-1/2”, 2”. Angúlo máximo 35°
AMXmachinery
PARTE: 2AM-U-500 - ARMADORA DE MARCOS PROGRAMABLE - 1 CANAL
PARTE: 2AM-U-500 - ARMADORA DE MARCOS PROGRAMABLE - 1 CANALOur U-500 is recommended for high-volume production facilities that require the primary use of a single sized V-Nail for frame joining. The U-500 has the same user-friendly, touch screen interface as our U-600 Underpinner. The only difference between the two models being the U-500 has single channel capacity compared to a multi-channel with the U-600 unit.With data storage of 5,000 different frame profiles, the operator can easily recall...