Identificador: 2626
Abierta
Descripción
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6
USADO – BUENAS CONDICIONES - RECONSTRUIDO
Max trim width 7.5"
Shear Cutting Action
Rotor Speed 500 to 3,600 RPM
Model 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution.
The open-rotor design facilitates free passage of air and material.
Shear-cut action for paper and tough, thin film and foil.
Total weight is 135 pounds
17"L x 13.25W x 22.5H
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2GB- MH89-2-50 - CABEZAL PARA MOLDURADORA - 2 NAVAJAS
PARTE: 2GB- MH89-2-50 - CABEZAL PARA MOLDURADORA - 2 NAVAJAS1” DIAMETRO INTERIOR X 89MM (3.5”) DIAMETRO EXTERIOR X 50MM (1.96”) LARGOPara 2 cuchillas corrugadasAngulo de corte 15 gradosNavajas se venden por separadoPrecision CNC machined from high strength hardened alloy steel and designed to operate at speeds up to 9,000 rpm. Exceed the most stringent European OEM standards allowing you to produce smooth material finish with years of trouble-free use.
AMXmachinery
PARTE: 12527 - ENCHAPADORA DE CANTOS - BIESSE AKRON 1435A
PARTE: 12527 - ENCHAPADORA DE CANTOS
- BIESSE AKRON 1435A
USADA – MUY BUENAS CONDICIONESYear: 2018CAPABILITIES-One-sided
edgebander with glue pot-CNC
control and command system with TS10 digital controller, large ``touch
screenLCD graphic display, WINDOWS CE operating system, USB port-Chain
drive and upper presser-Group
of pressure rollersWorkstation
:-Premilling-Gluing
unit with pellet pot-Adjustable
pneumatic pressure unit-End
cutting unit 2 tilting saws 0-15˚ for bevel cutting...
AMXmachinery
PARTE: 12557 - CABINA DE PINTURA - CERRADA - AUTOMOTRIZ - SPRAY ZONE
PARTE:
12557 - CABINA DE PINTURA - CERRADA - AUTOMOTRIZ - SPRAY ZONE
USADA - MUY BUENAS CONDICIONES7.15 m largo x 4.26 m ancho
x 3.04 m alto
AMXmachinery
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"Nueva con garantíaPara palos de escoba, trapeadores y recogedoresAlta produccionCapable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use ...