Identificador: 2626
Abierta
ID de articulo : # 2626 se ha agregado a su lista de deseos.
Descripción
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6
USADO – BUENAS CONDICIONES - RECONSTRUIDO
Max trim width 7.5"
Shear Cutting Action
Rotor Speed 500 to 3,600 RPM
Model 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution.
The open-rotor design facilitates free passage of air and material.
Shear-cut action for paper and tough, thin film and foil.
Total weight is 135 pounds
17"L x 13.25W x 22.5H
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
DADO PARA LA CORTADORA DE ESQUINAS PARTE # ACC-CM40A - 3/8" RADIUS
PARTE: 2ACC-CM40A-DA – DADO PARA LA CORTADORA DE ESQUINAS PARTE # ACC-CM40A - 3/8" RADIUSNUEVO CON GARANTIA SOBRE DEFECTOS DE FABRICACION3/8" RADIUS1 en existencia en bodega en Chihuahua, Chih.Se usan tambien para cortar lamina para reconocimientos en las esquinas con redondos, etc. Capacidad de Corte:·Aluminio…................................................. .040"·Laton dureza media ................................ .025"·Plastico flexible......................................... .125...
3,900.00 MXN
AMXmachinery
PEGADORA CANTO CHAPA - ESPESOR 0.5 - 5.0 MM
PARTE # 3NN-VENEERPLUSG2 - PEGADORA DE CANTO LONGITUDINAL PARA CHAPASistema de pegamento integrado Machine SpecificationVeneer Strip Thickness (depending on veneer condition)：approx. 0.5 ~ 5.0 mmVeneer Strip Length：min. 350 mmVeneer Strip Width：min. 45 mmProduction Speed：approx. 8 ~ 45 m/min. (depending on veneer strip thickness)Electric Power：approx. 10.8 kwCompressed Air：5 barHeating Temperature：100 ~ 220 °CHeating Zone：1500 mmDimensions (L x W x H)：2550 x 2100 x 1600 mmNe...
-500x500.jpg)
AMXmachinery
PRENSA ENSAMBLADORA FINGER JOINT
PARTE: 2TA-SFJ-4500A - PRENSA
ENSAMBLADORA FINGER JOINTFeatures:
Very efficient automatic
machine that performs three functions:
Jointing of
sectional sticks which have been glued
Cutting the jointed
sticks to desired length
Final assembly is
securely pressed by powerful hydraulic system
Then the jointed
sticks be fed out regularly
Auto power feeder
for fast feeding and auto stops at the desired length to be cut.
Furnished with
cut-off saw as standard equipment for c...
AMXmachinery
PARTE: 4EL-DS - SIERRAS ESCUADRADORAS VERTICALES - ELCON - SERIE DS
PARTE: 4EL-DS - SIERRAS ESCUADRADORAS VERTICALES - ELCON
- SERIE DS
SERIE
DS-155
SERIE DS-185
SERIE
DS-215
SERIE DSL-155
SERIE DSL-185
SERIE DSL-215
SERIE DS1/2L
SERIE DS1/2L
SERIE DS1/2L
Model & Dimensions (mm)
155
185
215
Maximum
cutting length
3300
3300
4300
Maximum
cutting height - Horizontal
1505
1805
...