Identificador: 2707
Abierta
PARTE: 12637 - TRITURADORA – ASTILLADORA – 30 HP – VERTICAL – WEIMA
AMXmachinery
Descripción
PARTE: 12637 - TRITURADORA – ASTILLADORA – 30 HP – VERTICAL – WEIMA
USADA – BUENAS CONDICIONES
Rotor Motor: 30 HP
Rotor Speed: 100 RPM
Rotor Diameter: 252mm
Rotor Width: 800mm
460v, 3ph
Year: 2014
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA TRONZADORA DE 45 A 90 GRADOS AJUSTABLE – DISCO 20”
PARTE:
2TA-CS- 20RL45 – SIERRA TRONZADORA DE 45 A 90 GRADOS AJUSTABLE – DISCO 20”
NUEVA
CON GARANTIA
Features:
Adjustable
maximum 45 degree to the right or left or 90 degree angle setting for
semi-automatic, fast cutting.
Semi-automatic
by pneumatic movement cutting.
Auto.
cutting cycle simply operated by foot switch.
Sealed
long-life ball bearings.
Full 10
HP motor for powerful cutting capacity.
Precision
ground cast iron table with heavy metal cabinet st...
AMXmachinery
PARTE: 12575 - SEPARADOR MAGNETICO DE BANDA
PARTE: 12575 - SEPARADOR MAGNETICO
DE BANDA
SIN USAR, EXCELENTES CONDICIONES
Unused,
“New” Conditions
Motor:
3 HP, 230/460V/3/60
Marca:
Wolverine
29-1/2”
wide x 70” long Belt
Motor:
WEG 3HP
Approximate
Weight/unit (kgs): 776
Aproximate
Pack Size/unit - L*W*H (mm) : 2276 * 1216 * 572
Speed
- It is fixed speed and can be changed with a controller.
Magnet
power is strong - the original design was to pull small scrap metal from sand
on conveyor belt.
AMXmachinery
ENCHAPADORA DE CANTOS – 220V, 2 FASES
PARTE: 2MK-CBC.T – ENCHAPADORA DE
CANTOS – 220V, 2 FASES
Nueva con garantíaFRONT/REAR TRIMMINGTOP/BOTTOM TRIMMING
BUFFING UNIT
This
machine is a master piece of engineering, packet with features that will make
your job easier giving you a product finish like never before. Super steady and
stable the CBC.T platform is a stainless steel mono-block base. All operating
units are easy to be accessed through the upper protection hood.
The
friction-free worktable feed panels ...
-500x500.jpg)
AMXmachinery
SIERRA CINTA PARA METAL - CAP. 7"
PARTE: 1SL-DC-MBS7 – SIERRA CINTA HORIZONTAL Y VERTICAL PARA METAL - CAP. 7" DIAMETRONUEVA CON GARANTIAMOTOR: 1 HP, 110V, 60 HZ, 1 FASEVELOCIDAD: 41,49, 69 METROS POR MINUTOMAXIMO DIAMETRO EN TUBOS: 7"MAXIMO DIAMETRO EN RECTANGULOS: 7" X 12"DIMENSIONES DE LA CINTA: 3/4" X .032 X 93"PESO: 185 KGSEMPAQUE: 1 CAJAMEDIDAS YA INSTALADA: 2.0 MTS LARGO X 1.2 MTS ANCHO X 1.6 MTS ALTOINCLUYE BOMBA PARA REFRIGERANTE