Identificador: 233
Abierta
ID de articulo : # 233 se ha agregado a su lista de deseos.
.jpg)
.jpg)
Descripción
PARTE # 2TA-DS-2500 - LIJADORA DE TAMBOR LOBO/CASTALY - 25" DE ANCHO
PARTE # 2TA-DS-3700 - LIJADORA DE TAMBOR LOBO/CASTALY - 37" DE ANCHO
Caracteristicas:
- Easily operate with performance for sanding flat objects.
- Heavy sheet metal cabinet stand.
- Balanced cast aluminum sanding drums.
- Two different grits and level sanding drums are designed for fast and fine finish at one pass.
- First drum is cast aluminum; second drum is coated with rubber for fine sand paper.
- Automatic feeding operates by non-slipping rubber grips conveyor.
- Raise or lower the table easily by large hand wheel.
- Three spring loaded pressure rolls keep the object flat on conveyor without sliding.
- Full power industrial motor for durability usage.
- Magnetic switch with overload protection.
- Precision sealed long life bearing.
| SPECIFICATIONS | DS-2500 | DS-3700 |
| Max. Sanding Width | 25" | 37" |
| Max. Sanding Thickness | 4" | 4" |
| Table Dimensions | 25" x 34¼" | 37" x 34¼" |
| Sanding Drum Dia. | 6" | 6" |
| Speed of Sanding Drum | 1700 RPM | 1700 RPM |
| Feeding Speed | 12 FPM | 12 FPM |
| Sanding Speed | 5 HP | 5 HP |
| Feeding Motor | ¼ HP | ¼ HP |
| N.W. | 1050 LBS | 1120 LBS |
| G.W. | 1180 LBS | 1270 LBS |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA INGLETEADORA – DOBLE – CTD
PARTE: 12105 – SIERRA INGLETEADORA – DOBLE – CTDUsada – Buenas condiciones230/460V, 60 Cy, 3 PhaseMotor: 3 HP, 3450 RPM.09 Cubic Meters At 5.2 KG/ CM Squared Based on 10 Strokes per MinuteSaw Heads Swivel From 90 Degrees-45 Degrees Toward Each-Other with Degree Markings and Stops at 90 Degrees-45 Degrees8' Centers, Traveling Right Hand Carriage On Rack and PinionSaw Arms-Pivot Brackets are Cast Iron10" Blade-2" (51MM) x 4-7/8" (124MM)12" Blade-2.5" (64MM) x 5-3/8 (136 MM)Weight: 2000 LBS...
AMXmachinery
PARTE: 12517 - EXTRACTOR DE ASERRIN - EXTERIOR
PARTE: 12517 - EXTRACTOR DE ASERRIN - EXTERIOR
USADA - BUENAS CONDICIONES
AMXmachinery
AFILADORA WEINIG R934
PARTE # 11535 - AFILADORA - WEINIG R934En buenas condiciones de operacion
AMXmachinery
DOBRADORA DE TUBO HIDRAULICA
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICANueva con garantia- Bends up to 2"schedule 40 pipe (1.54")- Dies available in 120 and 240 degrees- Dies and all Pins are heat treated- Bronze bushings at Pivot Points- Capabilities greater than benders costing 3 times as much- High quality components and cosntructionTube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degreesPipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degreesWei...