Identificador: 2722
Abierta
Descripción
PARTE: 12650 - CEPILLO - 4 CARAS - 24” ANCHO - PINHEIRO
Usado – Muy buenas condiciones
24" max. planing width
20" max. moulding width
3" min. moulding width
8" max. thickness capacity
16" min. length workpiece unbutted, 9" butt fed
7.5 HP top head
5.5 HP bottom head
side heads are 17.5 HP each
4 HP variable speed feed 20 to 100 FPM
Top and bottom heads are 4-knife straight knife cutter heads
Side heads are 5" dia. X 8" long 4-knife corrugated back cutter heads
1-13/16" dia. arbor on side heads
5,000 RPM spindle speed on side heads
power raise and lower of table
sectional feed rolls
(9) powered feed rolls
8" dia. dust hood on top head
7" dia. dust hood on bottom head
6" dia. dust hood on each side head
separate electrical control panel
Total HP 59; 440 Volt; 77 amps
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIJADORA DE BANDA ANCHA – 3 LIJAS – 52” ANCHO – TIMESAVERS
PARTE: 12190 – LIJADORA DE BANDA ANCHA – 3 LIJAS
– 52” ANCHO – TIMESAVERS
USADA – BUENAS CONDICIONES – POCO USO
50 HP,
460/60/3, 12" diam. rubber contact drum with hold-down shoes
50 HP,
230/460/60/3 platen with hold-down shoes
40 HP,
230/460/60/3 platen with hold-down shoes
5 HP,
208-230/460/60/3 feed system motor with Poweflex VFD
Powered
up/down conveyor with digital ProScale readout
75"
abrasive belt length, electric eye tracking, & motor load meters...
AMXmachinery
PARTE: AMX-10154 - EXTRACTOR DE TURBINA - 1.5 HP - DAYTON
PARTE: AMX-10154 - EXTRACTOR DE TURBINA - 1.5 HP -
DAYTON
USADO - MUY BUENAS CONDICIONES
MODELO: 4C329
MOTOR: 1.5 HP, 208/230/460/380V, 3
FASES
ENTRADA REDONDA: 7”
SALIDA RECTANGULAR: 4” X 5”
MEDIDAS TOTALES: 18” ANCHO X 16”
FONDO X 20” ALTO
AMXmachinery
DOBRADORA DE TUBO HIDRAULICA
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICANueva con garantia- Bends up to 2"schedule 40 pipe (1.54")- Dies available in 120 and 240 degrees- Dies and all Pins are heat treated- Bronze bushings at Pivot Points- Capabilities greater than benders costing 3 times as much- High quality components and cosntructionTube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degreesPipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degreesWei...
AMXmachinery
EXTRACTOR ASERRIN 3 HP
PARTE: AMX-10147 - EXTRACTOR ASERRIN 3 HP
USADO - BUENAS CONDICIONES
MOTOR 3
HP, 208 - 230/460V, 3 FASES, 3500 RPM, WEG SEVERE DUTY
ENTRADA REDONDA: 6.5”
SALIDA CUADRADA: 5” X 5”
MEDIDAS: 22” ANCHO X 19” FONDO X 27”
ALTO