Identificador: 2008
Abierta
LIJADORA DE BANDA PARA TABLEROS Y LARGUEROS CURVOS DIMENSIONES DE 120 X 240 CMS MOTOR
AMXmachinery
Descripción
PARTE: 12405-7 - LIJADORA DE BANDA PARA TABLEROS Y LARGUEROS CURVOS DIMENSIONES DE 120 X 240 CMS MOTOR
USADA - BUENAS CONDICIONES
220V, 3 FASES
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12660 - SIERRA PARA PANELES CON AISLAMIENTO - PANELES - 8" ALTO - 48" ANCHO
PARTE: 12660 - SIERRA PARA PANELES CON AISLAMIENTO - PANELES - 8" ALTO - 48" ANCHOUSADA - MUY BUENAS CONDICIONES
8" hight
max cut
Variable speed travel
90" cut at 90 degrees
carriage travels on heavy rails
was used to cut styrofoam panels
can be used to call all kinds of materials by changing the blade
Dimensions 168L x 48W x 79 HighMade
in the USA
It
typically designed to cut structurally insulated panels but you could pretty
much cut any material.
It
is desig...
AMXmachinery
MOLDURADORA 5 CABEZALES
PARTE # 3QD-MB5013DS - MOLDURADORA 5 CABEZALES - 20-130 MM ANCHOPARTE # 3QDMB5016DS - MOLDURADORA 5 CABEZALES - 20-160 MM ANCHOPARTE # 3QD-MB5018DS - MOLDURADORA 5 CABEZALES - 20-180 MM ANCHOPARTE # 3QD-MB5023DS - MOLDURADORA 5 CABEZALES - 20-230 MM ANCHOFEATURESModel3QD-MB5013DS3QD-MB5016DS3QD-MB5018DS3QD-MB5023DSPlaning width20-130mm20-160mm20-180mm20-230mmPlaning thickness10-100mm10-100mm10-100mm10-100mmFeeding speed10-30m/min10-30m/min10-30m/min10-30m/minSpindle speed6000rpm6000rpm6000rpm600...
AMXmachinery
PARTE: 2TA-DC7500 - CORTADORAS DE PERNOS - ¼” - ¾” - PARA HACER TAQUETES RAYADOS - ALTA VELOCIDAD
PARTE:
2TA-DC78 - CORTADORAS DE PERNOS - ¼” - ¾” -
PARA HACER TAQUETES RAYADOSNUEVA CON GARANTIAFeatures:High
production, high speed.Can
auto sift out dowel which length is insufficient.Each
spiral fluting, straight fluting, smooth and dowels with dowel cross-cut and
chamfering from DC-7500.Capacity:
about 7,500-15,000 dowels/hour with infinitely variable speed change.Cutting
length range: 30-150 mm.Accuracy
turbine and turbine shaft perform feeding transfer, lubrication for trans...
AMXmachinery
PARTE: 12609 - SIERRA RAJADORA – 1 SIERRA – IMC RP-12U
PARTE: 12609 - SIERRA RAJADORA – 1 SIERRA – IMC RP-12UUsada – Buenas condiciones15 HP, 220/440/60/3 motor, (belt driven)24" throat clearance56-1/2" x 74" workspace2 HP feed motor, (75-150 FPM) variable feedComplete with automatic chain lubication, magnetic controls and (1) set of anti kickbacks fingers62" x 80" x 60" overall dimensions