ID: 2744
Open
PARTE: 12660 - SIERRA PARA PANELES CON AISLAMIENTO - PANELES - 8" ALTO - 48" ANCHO
AMXmachinery
Description
PARTE: 12660 - SIERRA PARA PANELES CON AISLAMIENTO - PANELES - 8" ALTO - 48" ANCHO
USADA - MUY BUENAS CONDICIONES
8" hight
max cut
Variable speed travel
90" cut at 90 degrees
carriage travels on heavy rails
was used to cut styrofoam panels
can be used to call all kinds of materials by changing the blade
Dimensions 168L x 48W x 79 High
Made in the USA
It typically designed to cut structurally insulated panels but you could pretty much cut any material.
It is designed for horizontal cuts and angles.
You can cut material up to 8" thick.
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
REFACCIONES PLANTAS ELECRICAS POWEREN
REFACCIONES PLANTAS ELECRICAS POWEREN- AVR- ROTOR- ESTATOR- PORTA CARBONES- BATERIAS- MARCHAS- TANQUES- SOPORTES- PISTONES- ANILLOS- BIELAS- VALVULAS- RETRACTIL- KIT DE AFINACION- FILTRO DE AIRE- CARBURADOR
AMXmachinery
ARMADORA DE SILLAS - LANCASTER
PARTE: 12384 - ARMADORA
DE SILLAS - LANCASTER
USADA – BUENAS
CONDICIONESMax opening between jaws (front/back) 32"Max opening between jaws (side/side) 26"Max opening between clamping jaws on side clamp assembly
24"(2) horizontal adjustable swivel side clampsPneumatic clamping cylinders with 5" stroke(1) horizontal adjustable side to side clamp Pneumatic
clamping cylinder with 5" strokeManual traverse of end clamping jaws Bottom chair leg support
table
Foot ped...
AMXmachinery
PARTE: 1SL-DC-CH18F - TALADRO DE COLUMNA - MOTOR 1.2 HP - 110V, 1 FASE
PARTE:
1SL-DC-CH18F - TALADRO DE COLUMNA - MOTOR 1.2 HP - 110V, 1 FASENUEVO CON GARANTIAMOTOR: 1.2 HP, 110V, 60 Hz, 1 FASE12 VELOCIDADES: 340 - 2860 RPMCHUCK: 5 A 20 MM (3/4")DISTANCIA DEL CHUCK A COLUMNA: 175 MMCARRERA CHUCK: 85 MMDISTANCIA DEL CHUCK A LA MESA: 565 MMDISTANCIA DEL CHUCK A LA BASE: 1050 MMDIMENSIONES DE LA MESA: 285 X 285 MMDIMENSIONES TOTALES: 1140 MM X 500 MM X 300 MMPESO: 80 KGSEMPAQUE: 1 CAJA* INCLUYE PRENSA DE 4"
AMXmachinery
LIJADORA DE TAMBOR
PARTE # 2SM-72550 - LIJADORA DE 1 TAMBORES - 25”- 50” DE ANCHOSPECIFICATIONSSanding Capacity:Maximum Width (in): 50 (two passes)Minimum Length (in): 2-1/4Maximum Thickness (in): 4Minimum Thickness (in): 1/32Dimensions (in):46L x 27W x 53H (on stand)Drum:5 x 25 extruded aluminumDrum Speed:1740 RPMDust Hood:1- 4″ vacuum port, min. 600 CFM recommendedConveyor Motor:43 in.-lb. torque, direct drive D.C. motor, ranged variable 0-10 FPMDrive Motor (TEFC):1-3/4 HPPower Requirements110 V 20 ampShi...