Identificador: 2148
Abierta
PARTE: 1AM-1250 – RESACADORA PARA TARIMAS – DOBLE RESAQUE - 2 MOTORES 10 HP
AMXmachinery
Descripción
PARTE: 1AM-1250 – RESACADORA PARA TARIMAS – DOBLE RESAQUE - 2 MOTORES 10 HP - 4 CUCHILLAS
RESAQUE 9” LARGO
Nueva con garantía – 6 meses sobre defectos de fabricación en partes mecánicas
2 Motores 10 HP, 220/440V, 3 fases - conectado a 220V
Construcción Uso Rudo Industrial
Incluye 1 juego de cuchillas instalado
Medidas maquina:
60” ancho x 53” fondo x 37” alto - Peso 600 kg
153 cm ancho x 135 cm fondo x 94 cm alto - Peso 600 kg
Para mas especificaciones e informacion contactenos,
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
DESORILLADORAS
DESORILLADORAS LM E25G Edger:- 25 HP Kohler® engine.- 13" carbide tipped split blades.LM E26D Edger:- 26 HP CAT® diesel engine.- 15" carbide tipped split blades. CARACTERISTICAS ESTANDAR:Hydraulic feed of the board through the bladesHydraulic adjustment of the moveable blade and board setworks.4 industrial infeed and 4 outfeed adjustable rollers.7' infeed and 7' outfeed roller bed.Highway approved trailer with 15" tires and 3500 lb. capacity axle.Easy to read scale stick at the front of the ...
AMXmachinery
PARTE: 12467 – BASTONERA – MOTOR 15 HP – CAPACIDAD ¼” - 2-1/4” DIAMETRO – JENKINS R
PARTE: 12467 – BASTONERA – MOTOR 15 HP –
CAPACIDAD ¼” - 2-1/4” DIAMETRO – JENKINS R
USADA – BUENAS CONDICIONES
4 KNIFE ADJUSTABLE CUTTERHEAD
15 HP MAIN MOTOR - 3600 RPM
TOP
AND BOTTOM IN AND OUTFEED ROLLERS
FEED
SPEEDS 60-90-100-120 FPM, BOTH FORWARD AND REVERSE, 2 HP FEED MOTOR
MACHINE
INCLUDES (4) KNIFE HEAD WHICH IS ADJUSTABLE UP TO 1-1/2” DIAMETER
AMXmachinery
PARTE: 12548 - EMBALADORA - VERTICAL - 30” X 60” - CARTON - 67” ALTURA ABERTURA
PARTE: 12548 - EMBALADORA - VERTICAL - 30” X 60” - CARTON - 67” ALTURA ABERTURA
USADA - BUENAS CONDICIONES
Motor 10 HP
AMXmachinery
DOBRADORA DE TUBO HIDRAULICA
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICANueva con garantia- Bends up to 2"schedule 40 pipe (1.54")- Dies available in 120 and 240 degrees- Dies and all Pins are heat treated- Bronze bushings at Pivot Points- Capabilities greater than benders costing 3 times as much- High quality components and cosntructionTube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degreesPipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degreesWei...