ID: 2473
Open
Description
PARTE: 2CA-RM150 - BASTONERA - CAPACIDAD 1” - 5” DIAMETRO
NUEVA CON GARANTIA
- The unit is designed solely for shaping of round poles in wood working factory.
- The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.
- The cutting head has been proven flawless through experience and study of many years.
- The unite cuts out perfectly round rod or stick, such as flag pole, rattan, acrylic molded board, carbon, bakelite, bamboo and wood.
- A hand wheel is provided to adjust simply the feed rollers.
- Wood fragments and dust are cleared off from the unit thoroughly in coherence with spindles revolution.
- Cutting of each type and size of workpiece will be carried out by specific cutter head and rollers for finished products.
- Automatic feeding, one-piece cast iron base.
- High-efficiency industrial TEFC motor for powerful cutting.
Design and specifications are subject to change without prior notice.
| SPECIFICATIONS | ||
| Motor of Main Cutter | ||
| Feed Motor | ||
| Cutter Speed | ||
| Feed Speed | ||
| Total Knife | ||
| Working Size | ||
| N.W. | ||
| G.W. |
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
TORNO COPIADOR - REGULAR - GENARI
PARTE: 12290 - TORNO COPIADOR - REGULAR - GENARI
USADO - BUENAS CONDICIONES
MOTOR 5 HP, 220v, 3 FASES
DISTANCIA ENTRE PUNTOS: 1.20 METROS
AMXmachinery
SIERRA MULTIPLE PARA PANELES - MULTISCORE
PARTE: 12197 - SIERRA MULTIPLE PARA
PANELES - MULTISCORE
USADA – BUENAS CONDICIONESMarca
: Multiscore Panel Machinery
Working
wide 1250mm
Mod.
MR21
Manufacture
year 1995
Motor
20 HP, 220V
Infeed
speed from 0-20 ml/min
AMXmachinery
PARTE: 12582 – CHAFLANADORA -UNKNOWN
PARTE: 12582 – CHAFLANADORA -UNKNOWNUSADA – BUENAS CONDICIONES
AMXmachinery
PARTE: 2TA-PT-13HF-GN – GENERADOR - ALTA FRECUENCIA 13 KW
PARTE: 2TA-PT-13HF-GN – GENERADOR - ALTA FRECUENCIA 13 KWNew with warrantyFor mass productions, 2 to 3 minute per cycle for drying or bending the wood projectVarieties of wood bending shapes are able to produce.Press one large part, slicing into many small pieces for high productivity.Meet all kinds of furniture fabrications.One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.Using wooden mold instead...