Identificador: 2473
Abierta
Descripción
PARTE: 2CA-RM150 - BASTONERA - CAPACIDAD 1” - 5” DIAMETRO
NUEVA CON GARANTIA
- The unit is designed solely for shaping of round poles in wood working factory.
- The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.
- The cutting head has been proven flawless through experience and study of many years.
- The unite cuts out perfectly round rod or stick, such as flag pole, rattan, acrylic molded board, carbon, bakelite, bamboo and wood.
- A hand wheel is provided to adjust simply the feed rollers.
- Wood fragments and dust are cleared off from the unit thoroughly in coherence with spindles revolution.
- Cutting of each type and size of workpiece will be carried out by specific cutter head and rollers for finished products.
- Automatic feeding, one-piece cast iron base.
- High-efficiency industrial TEFC motor for powerful cutting.
Design and specifications are subject to change without prior notice.
| SPECIFICATIONS | ||
| Motor of Main Cutter | ||
| Feed Motor | ||
| Cutter Speed | ||
| Feed Speed | ||
| Total Knife | ||
| Working Size | ||
| N.W. | ||
| G.W. |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ESPIGADORA DOBLE DE CADENA - SCMI
PARTE: 12413 – ESPIGADORA DOBLE DE CADENA - SCMI
USADA - BUENAS CONDICIONESSCMI Concept 2000 •
Opening Capacity: ~4'•
Two-Post Machine• First
Station: Left & Right Trim Saws• Trim
Saw Motors: 8 HP Each• Second
Station: Left & Right Jump-CopeUnits,
7000 RPM• Jump
Cope Motors: 11.5 HP Each• Third
Station: Left & Right Cope Units, 7000RPM• Cope
Motors: 11.5 HP Each• Load
Space: 32"• Rubber
Padded Feed Chains 2.75" Wide• Pop-Up
Dogs on 14-3/4" Centers•
Push-...
-500x500.jpg)
AMXmachinery
PARTE: 2EB-MR-S380 - AFILADOR PARA SIERRA CINTA DE 16 a 45 MM
PARTE: 2EB-MR-S380 - AFILADOR PARA SIERRA CINTA DE 16 a 45 MMParameters:Saw blade width: 16-45mmTeeth space: 3-30mmFeed speed: 40-60 teeth/minGrinding wheel: 150mmPower/Speed: 2800 rpmVoltage: 220V/380V, 50HZ/60HZ (Especificar voltage al hacer la orden)Dimension/Weight: 60×50×100cm/102kg
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES - 132 LITROS
PARTE:
2PG-JANUS24 – HORNO PARA CERAMICA, VIDRIO, METALES - 132 LITROSNUEVO CON GARANTIAHeating elements are mounted in the top, sidewalls, and door.Select between glass and pottery with the flip of a switch. With the switch in the glass position, heat comes from the top elements and the middle sidewall element. With the switch in the pottery position, heat comes from only the sidewall elements.In the glass mode, fuse and sag large glass projects placed on a single shelf. In the pottery mode,...
AMXmachinery
SIERRA INGLETERA DOBLE – CAPACIDAD 13” - 100” LARGO – CTD
PARTE: 12417 - SIERRA INGLETERA
DOBLE – CAPACIDAD 13” - 100” LARGO – CTD
USADA – MUY BUENAS CONDICIONES3
HP TEFC Dual Voltage MotorsWired
for 460 Volt, 3 PhaseStart
and E-Stop buttonsLeft
head fixed, Right head manually position via hand crankMinimum
Cut Length @ 90 = 13”Maximum
cut length @ 90 = 100”Both
heads rotate inward 90 to 45 degreeBoth
heads tilt outward to 45 degree for compoundTwo
hand anti tie down cycle control on pedestalBuilt
in 3rd party hydro-checkPne...