Identificador: 1728
Abierta
Descripción
PARTE: 2CK-DWM-36 - ARMADORA DE CAJONES
- Quick setting
- Strong machine structure ensures square drawer boxes
- Ergonomic design for convenient loading and unloading
KEY ADVANTAGES
- Capable of clamping a wide range of drawer types: dovetail, dowel, tongue & groove, and dado
- Fast changeover between various drawer widths with the rapid change clamp
- Ergonomic workstation on an angle to improve production output
- Double acting air cylinders can apply pressure progressively allowing for easy fitting of the bottom panel in the lateral grooves
- The Progressive Compression Mode operates as a jog button. It offers the operator total control and flexibility in the execution of the assembly process.
- Two-hand control keeps your operator’s fingers away from the danger zone during the compression cycle
- 10” (Height) x 24” (Depth) x 36” / 42” / 48” (Width) clamping capacity
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
LIJADORA DE BANDA VERTICAL HEAVY DUTY - 7.5 HP
PARTE: 2CK-OES509DIs the ideal edge sander for demanding applications for production use. Equipped with a 9” high oscillating sanding belt, it is ideal for sanding drawer boxes, doors, furniture components and more. Is also equipped with dual front and rear tables which are adjustable up & down and can be tilted to 45 degrees, allowing for a wide range of applications and for full utilization of the sanding belt. The dual tables also allow for two operators to be working on the machine a...
-500x500.jpg)
AMXmachinery1
SIERRA ESCUADRADORA - 10 PIES
PARTE: 2CK-P305Is built for the budget conscious user that still wants precision and accuracy. The machine has a precision sliding table which runs on ball bearings and hardened steel guide strips. It is equipped with individual motors for the main saw blade (5 HP) and scoring blade (1 HP). The blade height and tilt is manually adjusted by means of individual handwheels. The angle of the blade is displayed by a linear scale for added operator convenience. The rip fence runs on a ro...
-500x500.png)
AMXmachinery1
COLECTOR DE POLVOS - 5HP
PARTE: 2MK-CPD/5.S - COLECTOR DE POLVOS - 5HPIs ideal for cabinet shops with high production. With a 200 liters (53 Gallons) tank capacity, you can attach carbon steel or bag, both tanks are easy to be replaced. It has 5 entries with 100 mm (4 inches) and a 5 hp motor. The entry system can be changed according to the needs of its owner.Technical InformationMotor specs5 HP 3 phases 220V 20 AAir Flow Capacity2760 CFMBag volume400 L (14.13 ft³)Number of air inlet:5 (4in)Filtration2.5 micronBag siz...
AMXmachinery1
SIERRA MULTIPLE - 1 SIERRA
PARTE: 2CK-303SIs a straight line ripsaw that is the ideal ripping upgrade for those looking to prepare material for a moulder or for producing face frame material. Automatically feeds the material for consistent rip results. The cast iron feed chain runs on double V guide rails and holds the material firmly for precision straight cutting. A powerful 10 HP motor with maximum 12” blade provides a cutting depth up to 3.35”. A micro adjustable infeed fence allows for quick setups to ensur...