Identificador: 1731
Abierta
Descripción
PARTE: 2CK-FL-08 - SISTEMA FINGER JOINT - AUTOMATICO
AUTO INFEED TABLE
|
Length |
900mm (35.4”) |
|
Width |
600mm (23.6”) |
|
Infeed |
Table½ HP (3Ph) x 2 |
AUTO FINGER SHAPER – LEFT
|
Table Size |
600mm (23.6”) |
|
Length |
150~900mm (5.9” ~ 35.4”) |
|
Width |
20~60mm (0.78” ~ 2.36”) |
|
Thickness |
20~160mm (0.78” ~ 6.3”) |
SPECIFICATIONS:
- With 20HP (3Ph) for Main Spindle
- With 5HP (3Ph) for Trimming Saw
- With 2HP (3Ph) for Bottom Scoring Saw
- With 1/2HP (3Ph) for Feeding Conveyor
AUTO FINGER SHAPER – RIGHT
|
Table Size |
600mm (23.6”) |
|
Length |
150~900mm (5.9” ~ 35.4”) |
|
Width |
20~60mm (0.78” ~ 2.36”) |
|
Thickness |
20~160mm (0.78” ~ 6.3”) |
SPECIFICATIONS:
- With 20HP (3Ph) for Main Spindle
- With 5HP (3Ph) for Trimming Saw
- With Top and Bottom Scoring Saw, 2HP (3Ph) x 2
- With 1/2HP (3Ph) for Feeding Conveyor
- With Gluing System – Roller Type
TRANSFER ROLLER
|
Length |
900mm (35.4”) |
|
Width |
600mm (23.6”) |
TWO STAGE AUTO FINGER ASSEMBLER
|
Length |
6000mm (236”) |
|
Width |
20~160mm (0.78” ~ 6.3”) |
|
Thickness |
20~60mm (0.78” ~ 2.36”) |
SPECIFICATIONS:
- With 2HP (3Ph) for Feeding Table
- With 5HP (3Ph) for Sizing Saw
- With 5HP (3Ph) for Oil Pump
- With Saw Blade
- Speed – Max. 4~5 Piece/Min.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA MULTIPLE - 1 SIERRA - 15 PULGADAS
PARTE: 2CK-C14RSIs a single-blade ripsaw is geared towards the shop looking to increase efficiency in their ripping operations but cannot justify a multi-blade ripsaw. With its precision cast iron chain and track assembly, and extended pressure section, the C14RS can produce a glue joint finish ready for panel glue-up right out of the saw.Produces a guaranteed glue joint finish to 15′, which eliminates the need to joint the material after rippingPrecision straight line feeding for parallel a...
AMXmachinery1
LIJADORA EN SERIE
PARTE: 2LA-5000 - LIJADORA EN SERIECan be configured to sand the top, bottom or sides of parts utilizing a chain driven roller feed system. It has a fixed height roller conveyor.fully customizable to suit shop needsdesigned with a small footprintideal for sanding long thick partsruggeddependable
-500x500.png)
AMXmachinery1
ARMADORA DE CAJONES
ARMADORA DE CAJONES PARTE: 2CK-JEN60Is designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machin...
-500x500.jpg)
AMXmachinery1
PARTE: 3AM-G-40/70S - SIERRA CINTA PARA METAL - DOBLE COLUMNA
PARTE: 3AM-G-40/70S - SIERRA CINTA PARA METAL - DOBLE COLUMNASaw Band Tensioning Method: ManualCore Components: Gearbox, Gear, Bearing, Engine, MotorApplicable Industry: Machinery Repair Shops, Manufacturing Plant, Farms, Construction Works, Energy &Amp; Mining, Food &Amp; Beverage Shops, OtherCore Selling Point: High-AccuracyBlade Tension: ManualBlade Speed(m/min): 27.45.80Vice Clamping: Hydraulic with ManualCutting Feed: Hydraulic steplessMax. Cutting Capacity(mm): Round:300mm, sqaur...