Identificador: 272
Abierta
.jpg)
.jpg)
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”
AMXmachinery
Descripción
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”
New with warranty
For mass productions, 2 to 3 minute per cycle for drying or bending the wood project
Varieties of wood bending shapes are able to produce.
Press one large part, slicing into many small pieces for high productivity.
Meet all kinds of furniture fabrications.
One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.
Using wooden mold instead of expensive steel mold to save development cost dramatically
Use electricity power instead of steam boiler, no influence to the environment without emissions of PM2.5.
High frequency wave penetrate into inside of glue, shorten glue cured period and forming time.
One work is able to operate 4 to 6 bending press machines.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
BRIQUETEADORA DE METAL – VERTICAL – HIDRAULICA – 1000 KG/HR
PARTE: 3CH-XBJ-500 - BRIQUETEADORA DE METAL – VERTICAL – HIDRAULICA – 1000 KG/HRNueva con garantíaAlimentación automáticaLas briqueteadoras de metal pueden compactar diferentes clases de materiales como hierro fundido, aluminio, cobre, magnesio, titanio, molibdeno, metal, etc., en bloques de alta densidad sin aditivos.Specifications:Main cylinder: Nominal force 500 kNFeed cylinder: Nominal force 250 kN Block cylinder: Nominal force 500 kNBriquette size: 120 mmBriquette density: Steel...
AMXmachinery
PARTE: 1SL-DC-HQ400-3A - TORNO - TALADRO DE AVANCE AUTOMATICO 3 EN 1
PARTE: 1SL-DC-HQ4003A - TORNO - TALADRO DE AVANCE AUTOMATICO 3 EN 1NUEVO CON GARANTIADESCRIPCION:- MOTOR 1 HP, 220V, 60 Hz, 2 FASES- HACE ROSCAS MILIMETRICAS Y ESTANDARTORNO:- CAPACIDAD DE VOLTEO: 280 MMDISTANCIA ENTRE PUNTOS: 350 MMDIAMETRO DEL CHUCK: 100 MMVELOCIDADES: 7 VELS (160-1360 RPM)HUSILLO: 19 MMTALADRO:BROQUERO: 1.5 - 13 MMCARRERA DEL HUSILLO: 80 MMCAPACIDAD DE GIRO DE LA CABEZA DEL TALADRO: 90 GRADOSVELOCIDADES: 14 VELS (117-1300 RPM)MEDIDAS TOTALES: 42" LARGO X 23" ANCHO X 35" ALTO...
AMXmachinery
PARTE: 2AM-U-300 - ARMADORA DE MARCOS - SEMIAUTOMATICA
PARTE:
2AM-U-300 - ARMADORA DE MARCOS - SEMIAUTOMATICANUEVA CON GARANTIAThe U-300 is a bench-top, frame joining machine and the most popular model of custom frame shops. It is compact, well constructed, and built for many years of trouble free operation. The design of the U-300 allows the operator to set the front and back measuring stops for V-Nail insertion. The frame is then moved across the nail head and V-Nails are driven or stacked anywhere along the frame joint. The V-Nail insertion is a...
AMXmachinery
MOLDURADORA – 5 CABEZALES - WEINIG PROFIMAT
PARTE: 12163 - MOLDURADORA – 5 CABEZALES - WEINIG
PROFIMAT
USADA – MUY BUENAS CONDICIONES
Spindle diameter
1-1/2″
5-head (B-R-L-T-B)
working capacity 9-1/16″ x 4-11/16″
Spindle sequence:
Bottom 10HP, Right/left 15HP, Top 15HP, and Bottom 10HP
Mechanical digital
readouts
Variable speed 20-78
FPM
Powered by 4 HP
motor
Full sound enclosure
Receding chip maker
and pressure element at top spindle, in feed straightening table