Identificador: 272
Abierta
ID de articulo : # 272 se ha agregado a su lista de deseos.
.jpg)
.jpg)
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”
AMXmachinery
Descripción
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”
New with warranty
For mass productions, 2 to 3 minute per cycle for drying or bending the wood project
Varieties of wood bending shapes are able to produce.
Press one large part, slicing into many small pieces for high productivity.
Meet all kinds of furniture fabrications.
One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.
Using wooden mold instead of expensive steel mold to save development cost dramatically
Use electricity power instead of steam boiler, no influence to the environment without emissions of PM2.5.
High frequency wave penetrate into inside of glue, shorten glue cured period and forming time.
One work is able to operate 4 to 6 bending press machines.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 1SL-DC-R - SIERRAS CINTAS - REPUESTOS - 3/8" - 1-1/2" ANCHO
PARTE: 1SL-DC-R - SIERRAS CINTAS - REPUESTOS - 3/8" - 1-1/2" ANCHOPARTE - DESCRIPCIONDC-RSW1401N-1/4 - REPUESTO SIERRA CINTA 1/4" 6.35 X 2350 mm DC-SW1401NDC-RSW1401N-3/8 - REPUESTO SIERRA CINTA 3/8" 9.5 X 2350 mm DC-SW1401NDC-RSW1401N-1/2 - REPUESTO SIERRA CINTA 1/2" 12.7 X 2350 mm DC-SW1401NDC-RSW142-1/2 - REPUESTO SIERRA CINTA 1/2" X 2375 mm Diente 4DC-RSW142-3/8 - REPUESTO SIERRA CINTA 3/8" X 2375 mm Diente 4DC-RSW142-3/4 - RE...
AMXmachinery
PRENSA - GRABADORA DE MOLDURAS – DIFERENTS DISENOS – 2 MAQUINAS
PARTE: 12243 – PRENSA - GRABADORA
DE MOLDURAS – DIFERENTS DISENOS – 2 MAQUINAS
USADA – BUENAS CONDICIONES
Mfg
1981
Electric 230 volt, 60 cycle, 3 phase
Press
width 450mm (17.71")
Material
max width 500mm (19.68")
Material
Speed 200-1000 Meters per hr. (650 -
3200 ft)
Engraving
depth 3mm
Dual
propane torch heaters
Includes
Wheels as shown (100 - 250 mm diameter wheels)
Shipping
Footprint: 6 (length) x 6 (width) x 5 (height)
Weight: 25...
AMXmachinery
PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR
PARTE # 11913 - PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR8.5 ft. wide with approximately 6 clamps per sectionClamps are standard 2-1/2” high jaws by 32” openingIncludes air tightener and panel flattenerMachine was new in 1983Good conditions
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES - 132 LITROS
PARTE:
2PG-JANUS24 – HORNO PARA CERAMICA, VIDRIO, METALES - 132 LITROSNUEVO CON GARANTIAHeating elements are mounted in the top, sidewalls, and door.Select between glass and pottery with the flip of a switch. With the switch in the glass position, heat comes from the top elements and the middle sidewall element. With the switch in the pottery position, heat comes from only the sidewall elements.In the glass mode, fuse and sag large glass projects placed on a single shelf. In the pottery mode,...