Identificador: 25
Abierta
Descripción
PARTE: 2TA-TG-6000 – AFILADORA DE CUCHILLAS RECTAS - 26" LARGO
Nueva con garantia
Features:
Heavy-duty straight knife grinder, rapid for grinding processing and saving time.
Economical model and efficiency for processing high powerful of any straight knife grinding such as Planner & Jointer Knife, Peeling Knife, Super Surface Knife, and Veneer Cutting Knife.
Automatic grinding table movement forward and backward, label saver.
Employed with straight linear motion guides bearing to ensure longitudinal feed traverse smoothly and accurately.
The knife can be put through a coarse wheel grinding, then a fine wheel grinding for sharpening the knife edge again to obtain the super sharp edge and extend the cutting life of the knife.
Built in coolant pump for faster grinding.
Heavy sheet metal cabinet stand and cast iron body.
High precision and durability.
SPECIFICATIONS | 2TA-TG-3000 | 2TA-TG-5000 | 2TA-TG-6000 |
Grinding Capacity |
|
|
|
Cutter (Dia. x W) | 9" x 8" | N/A | N/A |
Carbide Saw (Dia. x T) | 20" x 3/8" | N/A | N/A |
Carbide Knife (L x W x T) | 12" x 1½" x ¼" | 25" x 3" x 5/8" | 25" x 3" x 5/8" |
Router Bits (Shank) Max. | ½" | N/A | N/A |
Grinding Wheel Size | 6" x 5/8" | 4" x 2" x 5/8" | 10" x 2/3" x 1" |
Grinding Head Travel | 14" | 26" | 26" |
Grinding Wheel Speed | 5000RPM | 1700 RPM | 1700 RPM |
Fine Grinding Wheel Size | N/A | --- | 4" x 2" x 2" |
Grinding Wheel Motor | 1 HP | ½ HP | 1 HP |
Fine Wheel Motor | N/A | --- | --- |
Table Size | 28' L x 8" W | 26" L | 27" L |
Table Travel | 20" x 7" | (Wheel) | 28" |
Table Travel Motor | --- | ¼ HP | ¼ HP |
Coolant Pump Motor | 1/8 HP | N/A | 1/8 HP |
N.W. (LBS) | 748 LBS | 340 LBS | 660 LBS |
G. W. (LBS) | 924 LBS | 430 LBS | 836 LBS |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
REASERRADORA HORIZONTAL – 1 SIERRA – ANCHO 8”
PARTE:
2FA-RE6X8 - REASERRADORA HORIZONTAL – 1 SIERRA – ANCHO 8”
NUEVA CON GARANTIA
The compact design and
variable speeds allow it to fit into any operation.
The 6 x 8 Master is resaw is
accurate and easy to adjust. Multiple head configurations are available up to 6
heads.
Standard Features
Air Tensioned Blade System
Enclosed Hydraulic System
Easy Height Adjustment
Machine Specs
Dimensions
Length: 84"
Width: 90"
Height: 48"
Feed Belt...
AMXmachinery
PARTE: AMX-10141 - ABANICO - 30” DIAMETRO - MOTOR ½ HP
PARTE: AMX-10141 - ABANICO - 30” DIAMETRO - MOTOR ½ HP
USADO - BUENAS CONDICIONES
30” DIAMETRO
16” FONDO
MODELO: 41NC07
MOTOR: ½ HP, 115V, 60 HZ, 1 FASE
RPM: 1,100/850
AMXmachinery
ARMADORA DE SILLAS - LANCASTER
PARTE: 12384 - ARMADORA
DE SILLAS - LANCASTER
USADA – BUENAS
CONDICIONESMax opening between jaws (front/back) 32"Max opening between jaws (side/side) 26"Max opening between clamping jaws on side clamp assembly
24"(2) horizontal adjustable swivel side clampsPneumatic clamping cylinders with 5" stroke(1) horizontal adjustable side to side clamp Pneumatic
clamping cylinder with 5" strokeManual traverse of end clamping jaws Bottom chair leg support
table
Foot ped...
AMXmachinery
LIJADORA DE CEPILLO TAMBOR NEUMATICO
PARTE: 2SR-DB-612DLX - LIJADORA DE CEPILLO Y TAMBOR NEUMATICOTambor neumatico disponible en 5 diametros, de 2” to 8”.El cepillo lija partes irregulares sin perder la forma o detalleMaquina standard: Equipada con tambor neumatico de 6” diametro x 7” ancho y cabezal de cepillo con 12 cepillos individuales y motor 3/4 HP2 llaves requeridas (no incluidas)Tambien disponible en cualquier combinacion de cabezasHecha en Estados Unidos, con estandares EstadounidensesMotor de uso rudo de ¾ HP, 1...