ID: 2324
Open
.jpg)
.jpg)
.png)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Description
PARTE: 4EL-D - SIERRAS ESCUADRADORAS VERTICALES - ELCON - SERIE D
SERIE D-155
SERIE D-185
SERIE D-215
|
Model & Dimensions (mm) |
155 |
185 |
215 |
|
Maximum cutting length |
3300 |
3300 |
4300 |
|
Maximum cutting height - Horizontal |
1505 |
1805 |
2105 |
|
Maximum cutting height - Vertical |
1550 |
1850 |
2150 |
Descripcion:
The D-range contains the most economical versions. With the same heavy robust frame and despite a fully complete equipment, this model is offered at a very attractive price. In the basic version this machine has a powerful 4 kW (s6) motor, extra depth of the saw blade, 2 entry rollers and a repeat stop for strip cutting.
Equipped with:
-1 meter point
4,0kW motor
Extra measuring stop
Manual lifting backframe
Foot operated rollers
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
EXTRACTOR DE TUBO - ASPAS 14” DIAMETRO - MOTOR 1/3 HP
PARTE: AMX-10130 - EXTRACTOR DE TUBO - ASPAS 14” DIAMETRO
- MOTOR 1/3 HP
USADO - BUENAS CONDICIONES
MOTOR 1/3 HP, 280/440V, 3 FASES
MEDIDAS: 14” DIAMETRO INTERIOR X 16”
DIAMETRO EXTERIOR X 14” FONDO
4,500.00 MXN
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...
AMXmachinery
ESPIGADORA DOBLE DE CADENA - FRIULMAC
PARTE: 12416 – ESPIGADORA DOBLE DE CADENA - FRIULMAC
USADA - BUENAS CONDICIONESModel
ContouramatThe
ideal solution for double-end trimming and coping, with only one operator
required!Working
Length: 115 - 1500mm (4.52" - 59")Working
Width: 30mm - 250mm (1.18" - 9.84")Working
Thickness: 12mm - 50mm (0.47" - 1.96")Configuration:
Double-End Trim & Double-End Cope/ProfilingLeft
& Right Trim Motors: 4 HP EachTrim
Blade Diameter: 125mm - 180mmTrim
Blade Bore: 30mmLeft
& Right Cope/Prof...
AMXmachinery
CEPILLO 2 CARAS - CAPACIDAD 30”
PARTE:
12335 - CEPILLO 2 CARAS - CAPACIDAD 30”
USADO - BUENAS CONDICIONES460/60/3, 135 amps electrics
Standard Specifications:
- 32-3/8" wide
x (3/8” to 6") thickness work-piece capacity
- 13” minimum
length x 2” minimum width work-piece
- 50 HP, 230/460/3
top head motor
- 50 HP, 230/460/3
bottom head motor
- 6” diameter,
5,000 RPM solid steel cutterheads
- Helical
cutterheads with insert style knives
- 10 HP 15 HP
inverter-controlled feed motor, (30 to 80 ft/min...