Identificador: 2166
Abierta
Descripción
PARTE: 4NE-VALIENTE - CENTRO DE MAQUINADO CNC - VALIENTE
Control Unit TPA (İtalian)
• Spindle: HITECO HSK F63 11KW ATC
• Vacuum Pump: BECKER 250M3
• Working Capacity: 2100mm*2800mm (2100mm*3660mm Option)
• Remote Control: YES
• Automatic Self Lubrication System: YES ( ILC - Italian )
• Under Bridge with 14 tool capacity magazine
• 14 Pieces Toolholder
• Vacuum Zone: 6 zone for 2128 / 8 zone for 2136
• Boring Unit FAM 9 Vertical ( Italian ) Optional
• Automatic Unloading and Cleaning System : Included
• Automatic Loading System : Optional
• Loading Lift : Optional
• Unloading Converyor : Optional
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
ENGOMADORA CON TRANSPORTADOR
PARTE: 2DO-GS2 - ENGOMADORA CON TRANSPORTADORFeatures a mild angle iron infeed conveyor, a stainless-steel glue roller
and a stainless-steel angle iron outfeed conveyor.
The basic model is 13 inches wide, with optional widths of 20" and
30". The infeed and outfeed conveyors are both 8 feet long and are
expandable by adding 2 feet increments. The material feeding speed is set at 60
feet per minute and the reservoir can be removed for cleaning and maintenance.
One
(1) Glue Conveyor...
-500x500.png)
AMXmachinery1
ENGANCHADORA CON CONTROLADOR NC
ENGANCHADORA CON CONTROLADOR NC PARTE: 2GM-HBB-1010NCISO 9001 certified Meet OSHA and CE safety standard48” NC table back gauge with fingers Max. 16 bends per program Upto 100 Program Storage Programmable Angle/ Angle Correct NC ram height control for open hemming Hardened fingers and table Germany Rexroth hydraulic system Yaskawa Servo motors and Drives Schneider electrical components All steel construction for maximum rigidityHydraulic logic...
AMXmachinery1
SIERRA OPTIMIZADORA - AUTOMATICA
PARTE: 2CK-CFS100 - SIERRA OPTIMIZADORA - AUTOMATICAIs the perfect upgrade from your manual cutoff saw with 3 to 5 times higher production output. It is designed to scan for defects in your material which are indicated by a florescent crayon mark. The saw will cut on the crayon mark allowing for fast defect removal. Equipped with several cutting modes like fixed, sequential, defect cutting modes the operator can select the program most suited to their needs. The powerful 10HP motor and 1...
-500x500.png)
AMXmachinery1
LIJADORA - 1HP
PARTE: 2MK-LDF - LIJADORA - 1HPCan handle a huge variety of tasks. It has a 6”x 11.5” belt, 9” disc and a 1HP motor. The tiltable table 0º to 45º and 0º to 90º disc will allow you to sand pieces in every angle.Technical InformationTable size6" x 11.5"Table tilt0º to 45ºBlade tilt0º to 90ºDisc9”Belt6”x 48”Belt speed1836 SFPMDisc speed2510 RPMMotor Specs1 HP 1 phase: 110 V – 8 AWeight134 Lbs.