Identificador: 2182
Abierta
.jpg)
.jpg)
.jpg)
PARTE: AMX-10120 - EXTRACTOR DE AIRE - INDUSTRIAL - MOTOR 10 HP - LOREN COOK
AMXmachinery
Descripción
PARTE: AMX-10120 - EXTRACTOR DE AIRE - INDUSTRIAL - MOTOR 10 HP - LOREN COOK
USADO - MUY BUENAS CONDICIONES
MARCA: LOREN COOK COMPANY
MODELO: 330 CPA - EF-1
HECHO EN USA
FABRICADO EN ALUMINIO - RUEDA INTERIOR Y CABINA EXTERIOR DEL EXTRACTOR
ESTRUCTURA DONDE VA EL MOTOR, LA POLEA Y LA FLECHA EXTERIOR DE ACERO
MOTOR BALDOR 10 HP, 208-230/460V, 3 FASES
MEDIDAS TOTALES: 63” ANCHO X 52” FONDO X 67.5” ALTO
MEDIDA ENTRADA: 41” DIAMETRO ABERTURA CEJA
MEDIDA ENTRADA: 22” DIAMETRO ABERTURA ADENTRO
MEDIDA SALIDA SUPERIOR: 36” ANCHO X 25” FONDO
PESO APROXIMADO: 550 KG
==============================================================================================
Centrifugal unit with a welded backward inclined aluminum wheel.
Fully welded aluminum housing that meets AMCA 99, Type ‘A’ spark resistant construction guidelines.
Additional application includes corrosive airstream, general ventilation and up to 300º restaurant exhaust.
FEATURES
Fully welded aluminum backward inclined wheel
Full welded aluminum housing
Standard construction meets AMCA Type ‘A’ spark resistant construction
Housing field rotatable one of eight discharge position
Available in arrangement 10 (Belt drive)
Available in arrangement 4 (Direct drive)
Removable discharge flange
Lifting lugs
Cast regreasable bearings
CONSTRUCTION
Housing Material: Aluminum, Steel
Finish: Lorenized ™
Ventilator Type: Blowers/Utility Sets
Impeller: Centrifugal
Bearings: L-50, over 200,000 hours
CONFIGURATION
Mounting: Roof (Curb Mount), Roof (Rail Mount), Floor
Drive Type: Direct Drive, Belt Drive
Motor: AC
Class: 1, 2
Discharges: THD, TAD, TAU, DB, UB, BHD, BAU
Arrangements: 4, 10
Rotatable Housing: Yes
Max Operating Temp (Standard Construction): 180°F
Max Operating Temp (Alt. Construction): 300°F
Speed Control: VFD, Vari-Flow, SimpliDrive
Flow: Supply, Exhaust
Filtration: Unfiltered
The information provided was gathered from literature, internet &/or physical inspection.
It is thought to be accurate; but not guaranteed.
Pago y Devoluciones
- Forma de pago
- PayPal, Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12611 - SIERRA RAJADORA – 1 SIERRA – MATTISON
PARTE: 12611 - SIERRA RAJADORA – 1 SIERRA – MATTISONUsada – Buenas condicionesModelo: 404Main Motor: 15 HPTable Size: 65" x 77"Throat Size: 24-1/4"Feed Motor: 2 HPFour-Speed Feed: 62, 93, 124, & 186 FPMInfeed Rip Fence w/ Two StopMaximum Stock Thickness: 4"Largest Diameter Blade: 14"Manual Arbor Raise/Lower Via Manual Hand-CrankSpindle Speed: 3,600 RPMCurrent Voltage: 440v, 3phMfg. 1984
AMXmachinery
SIERRA TRONZADORA – 7.5 HP - DISCO 14" - IZQUIERDA
PARTE: 12347 - SIERRA TRONZADORA – 7.5 HP - DISCO 14"
- IZQUIERDA
USADA
- BUENAS CONDICIONESMotor 7.5 HP, 220V, 3 phase4100 RPM arbor speedLeft Hand Model uses a 14” diameter saw blade with 1” boreCuts boards up to 1” x 10” or 2”x 9”, 3” x 8” at a rate of up to
95 strokes per minuteStandard full coverage safety guardTable size is 25” x 23-1/4” with a table height of 32-3/4”Requires 600 CFM air supply, and has a 4” diameter dust portMachine weighs 530 lbsOverall di...
AMXmachinery
PARTE: 3NN-VENEERSOLIDM1 - PEGADORA DE CANTO LONGITUDINAL PARA CHAPA
PARTE: 3NN-VENEERSOLIDM1 - PEGADORA DE CANTO LONGITUDINAL PARA CHAPAChapa Pre-Engomada requerida Machine SpecificationVeneer Strip Thickness (depending on veneer condition)：approx. 0.35 ~ 1.5 mm(solutions of splicing veneers with thickness of 1.5 ~ 3.5 mm offered)Veneer Strip Length：min. 200 mmVeneer Strip Width：min. 45 mmProduction Speed：up to 30 m/min.Electric Power：approx. 5.9 kwCompressed Air：5 barHeating Temperature：100 ~ 220 °CHeating Zone：800 mmDimensions (L x W x H)：1...
AMXmachinery
PARTE: 1SL-DC-PB16 - DOBRADORA DE TUBO HIDRAULICA DE 16 TONS
PARTE: 1SL-DC-PB16 - DOBRADORA DE TUBO HIDRAULICA DE 16 TONSNueva con garantiaPara tubo de ½”, 3/4”, 1”,1-1/4”, 1-1/2”, 2”, 2-1/2", 3". Angúlo máximo 30°