Identificador: 2204
Abierta
PARTE: AMX-10163 - EXTRACTOR DE PARED - 35” ANCHO X 39” ALTO X 10” FONDO
AMXmachinery
Descripción
PARTE: AMX-10163 - EXTRACTOR DE PARED - 35” ANCHO X 39” ALTO X 10” FONDO
USADO - MUY BUENAS CONDICIONES
MEDIDAS: 35” ANCHO X 39” ALTO X 10” FONDO
MOTOR 1/3 HP, 208/230V, 1 FASE
RPM: 825
Video: https://vimeo.com/870538760
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
EXTRACTOR DE TURBINA - 1 HP
PARTE: AMX-10134 - EXTRACTOR DE TURBINA - 1 HP
USADO - BUENAS CONDICIONES
MEDIDAS: 16” ANCHO X 16” FONDO X
20” ALTO
ENTRADA REDONDA 6”
SALIDA RECTANGULAR 4” X 3.5”
5,500.00 MXN
AMXmachinery
PARTE: 12594 - TRITURADORA - BLOAPCO - MODELO 7-9
PARTE: 12594 - TRITURADORA - BLOAPCO - MODELO 7-9USADO – BUENAS CONDICIONES – SIN USAR
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 299 LITROS
PARTE:
2PG-TNF283 – HORNO PARA CERAMICA, VIDRIO, METALES – 299 LITROSNuevo con garantiaThe massive, 12-sided digital TnF-28-3 is a profit center of the busy ceramic studio. It eats up stacks of low-fire ware. At a cost per cubic foot, the TnF-28-3 is one of the most economically priced standard kilns we make.The TnF-28-3 now features sectional construction. Separate the kiln bottom and sections to repair bricks, change elements, or to move the kiln down narrow stairwells or through the narr...
AMXmachinery
SIERRA ESCUADRADORA 3200 MM
PARTE # 2TA-TS-P3200MA - SIERRA ESCUADRADORA - 3200 MM NUEVA CON GARANTIAHeavy duty construction provides vibration free operation. Easy to set up and adjust.Manual raise, lower and tilt of main blade and scoring saw.Scoring unit provides clean, accurate, chip free cutting, ready for edge banding.Sealed main shaft bearings (lubricated for life) with vibration dampening system.Highly accurate, freely moving sliding table with wear resistant guide rails and rollers.Specially designed roller carri...