Identificador: 2617
Abierta
PARTE: AMX-10170 – MOTOR ELECTRICO – 15 HP, 230/460 V, 3550 RPM – MARCA TECHTOP
AMXmachinery
Descripción
PARTE: AMX-10170 – MOTOR ELECTRICO – 15 HP, 230/460 V, 3550 RPM – MARCA TECHTOP
USADO – MUY BUENAS CONDICIONES – COMO NUEVO
BALEROS NUEVOS MARCA FAG
PPROBADO
CONECCION PARA BRIDA
MARCA: TECHTOP
15 HP
230/460V
3 FASES
33.1/16.9 AMP
RPM: 3550
MEDIDAS: 23.5” LARGO X 12.25” ANCHO X 15.5” ALTO
SE ENVIA EN PEQUENA TARIMA
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”New with warrantyFor mass productions, 2 to 3 minute per cycle for drying or bending the wood projectVarieties of wood bending shapes are able to produce.Press one large part, slicing into many small pieces for high productivity.Meet all kinds of furniture fabrications.One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.Using woo...
AMXmachinery
CALDERA - CLEAVER BROOKS - GAS - 300 HP
PARTE: 12363 - CALDERA - CLEAVER BROOKS - GAS - 300 HP
USADA - BUENAS CONDICIONES
CLEAVER BROOKS 300 HP
MFG: 1996This unit has already been
removed and is ready to load.High pressure steam, 150 PSI
Natural Gas
AMXmachinery
SIERRA INGLETEADORA – DOBLE – CTD
PARTE: 12105 – SIERRA INGLETEADORA – DOBLE – CTDUsada – Buenas condiciones230/460V, 60 Cy, 3 PhaseMotor: 3 HP, 3450 RPM.09 Cubic Meters At 5.2 KG/ CM Squared Based on 10 Strokes per MinuteSaw Heads Swivel From 90 Degrees-45 Degrees Toward Each-Other with Degree Markings and Stops at 90 Degrees-45 Degrees8' Centers, Traveling Right Hand Carriage On Rack and PinionSaw Arms-Pivot Brackets are Cast Iron10" Blade-2" (51MM) x 4-7/8" (124MM)12" Blade-2.5" (64MM) x 5-3/8 (136 MM)Weight: 2000 LBS...
AMXmachinery
EXTRACTOR DE TURBINA - MOTOR 5 HP
PARTE:
12292 - EXTRACTOR DE TURBINA - MOTOR 5 HP
USADO - MUY BUENAS CONDICIONES - REVISADO Y CHECADO
MOTOR 5 HP, 220V, 3 FASES
3500 RPM
ASPAS METALICAS
ENTRADA REDONDA: 8”
DIAMETRO
SALIDA CUADRADA: 5.5”
X 7”
MEDIDAS TOTALES: 59
CM ANCHO X 52 CM FONDO X 62 CMQ ALTO