Identificador: 1294
Abierta
Descripción
PARTE:12254 - TALADRO MULTIPLE - RITER K-12F
USADA - BUENAS CONDICIONES
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIJADORA CALIBRADORA SUPERIOR E INFERIOR – 1300 MM (51”) - ANCHO
PARTE: 3UD-SUR1300V – LIJADORA CALIBRADORA SUPERIOR E
INFERIOR – 1300 MM (51”) - ANCHO
NUEVA CON GARANTIA
Rack sheet metal part
1) The lower body is
made of heavy-duty base, which is welded around
the whole with a whole
plate, and the bottom is welded with dense channel
steel and steel plate
connection, which enhances the stability and strength
of the lower body and
ensures that the base is not deformed;
2) The conveying bed is
welded with 18mm thick steel plate...
AMXmachinery
LAMPARA REPUESTO
PARTE: SIL-R-SBC-3 - Lampara de Repuesto para las cabinas de sand blast (arenado)
AMXmachinery
ROUTER PIN INVERTIDO - CR ONSRUD 3025
PARTE: 12126 - ROUTER PIN INVERTIDO - CR ONSRUD 3025
USADO – EN BUENAS
CONDICIONES – LIMPIADO Y REVISADO
230V, 3 PH, 60 CY
5 HP motor, belt driven to spindle
20,000 RPM spindle speed
Pneumatic spindle and guide pin movement via foot
pedal
3" spindle travel
24" x 36" acrylic topped table
30" throat depth
Three position adjustable depth stop
1/2" max. chucking capacity
"Fog Mist" lubricated spindle system
Automatic pre-lubrication of spindle bearings (each...
AMXmachinery
ESPIGADORA DOBLE DE CADENA - CAPACIDAD 59” - FRIULMAC
PARTE: 12415 – ESPIGADORA DOBLE DE CADENA - CAPACIDAD 59”
- FRIULMAC
USADA - BUENAS CONDICIONESModel
ContouramatWorkpiece
Length: 115 - 1500mm (4.52" - 59")Workpiece
Width: 30 - 250mm (1.2" - 10")Workpiece
Thickness: 12 - 50mm (.5" - 2")Left
& Right Top & Bottom Trip SawsTrim Saw
Motors are 4 HP Each (Two Per Side)Trim Saw
Blade Diameter: 125 - 180mmLeft
& Right Profiling/Cope StationsCope
Motors: 7.4 HP EachProfiling
Cutterhead Diameter: 160 - 220mmHopper
Feed
...