Identificador: 287
Abierta
.jpg)
.jpg)
Descripción
PARTE # 2TA-BS-1616HR-TN - REASERRADORA HORIZONTAL - 2 SIERRAS
NUEVA CON GARANTIA
| Specifications | BS-1212HR-TN | BS-1616HR-TN |
|---|---|---|
| Max. Cutting Capacity | 12" x 12" | 16" x 16" |
| Distance between Blade to Conveyor | 1/4" ~ 12" | |
| Saw Wheel Diameter | 28" x 2 | |
| Saw Blade Length (Width) | 201" (2") | 201" (2" ~ 3") |
| Saw Blade Speed | 6000 FPM | |
| Feed Conveyor Width | 12" | 16" |
| Feed Speed (Variable) | 0 ~ 90 FPM | |
| Main Motor (Each Head) | 20 HP x 2 | 30 HP x 2 |
| Saw Blade Lift Motor | 1/2 HP | |
| Feed Conveyor Motor | 3 HP | |
| Dust Hood | 4" x 6 | |
| N. W. | 7200 LBS | 8600 LBS |
- Machine was built with ruggedly constructed throughout for maximum stability, high precision cutting and minimum trouble.
- It is equipped with a digital controller for convenient and accurate thickness setting.
- The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts.
- When the feed conveyor is tilted for bevel cutting a side support is applied for safe and stable cutting operations.
- Variable feed speed is controlled by a frequency inverter for best cutting requested.
- The infeed and outfeed pressure rollers are easily raised or lowered by a gear rack.
- The infeed and outfeed pressure rollers are spring loaded and easily adjusted for the horizontal or vertical direction to suit various workpiece thicknesses.
- Blade tension is adjusted by means of a hand wheel.
- A tension scale allows the operator to correctly adjusted the tension for different blade thickness.
- The cast iron saw blade wheel are dynamically balance for smooth running.
- Blade guard is easily lifted up, supported by two nitrogen gas cylinders for convenient blade change.
- The roller type return conveyor equipped at left side of the machine provides easily repetitive cutting.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2GB- MH89-2-50 - CABEZAL PARA MOLDURADORA - 2 NAVAJAS
PARTE: 2GB- MH89-2-50 - CABEZAL PARA MOLDURADORA - 2 NAVAJAS1” DIAMETRO INTERIOR X 89MM (3.5”) DIAMETRO EXTERIOR X 50MM (1.96”) LARGOPara 2 cuchillas corrugadasAngulo de corte 15 gradosNavajas se venden por separadoPrecision CNC machined from high strength hardened alloy steel and designed to operate at speeds up to 9,000 rpm. Exceed the most stringent European OEM standards allowing you to produce smooth material finish with years of trouble-free use.
AMXmachinery
INDEX TABLE PVA COLD PRESS
PARTE # 2EV-4243 - INDEX TABLE - EVANS 4243Semi-automatica para laminacion de tableros PVA, alimentacion izq a der.Semi-automatic Index Table for PVA Panel Laminating- 80 PSI required- Standard Features:- Max. Board size, 62" X 145"- Min. Board size, 9" X 27"- In feed height 43”.- Out feed height 40”.- Open center for customer supplied scissors lift.- 18" extensions on in feed side.- Hand crank for width adjustment one revolution equals approx. 7".- Adjustable guides for board positioning.-...
AMXmachinery
PARTE: 2SW-LS4-36-B - BOMBA HIDRAULICA – PARA MESA DE TIJERA – CAP 4,000 LIBRAS
PARTE: 2SW-LS4-36-B - BOMBA HIDRAULICA – PARA MESA DE TIJERA – CAP 4,000 LIBRASNuevas con garantíaHechas en USA
AMXmachinery
TORNO DESENROLLADOR - ANCHO 54”
PARTE: 11720 - TORNO DESENROLLADOR - ANCHO 54”
1 - TORNO DE DESENROLLO DE 54 PULGADAS (4 PIES) SEMI-AUTOMATICO
MARCA IND. G.H. PARA DESENROLLAR TROCERIA DE 4 PIES DE LARGO Y DIAMETRO DE 25
PULG. MAXIMO GROSOR DE .08 HASTA 5.MM ACCIONADO CON CADENAS DE AVANCE Y MOTORES
DE 5,10,15 HP CON CAPACIDAD DE 30 TONELADAS DE DESENROLLO DIARIAS.