Identificador: 288
Abierta
.jpg)
.jpg)
Descripción
PARTE # 2TA-BS-1212HR-3 - REASERRADORA HORIZONTAL - 3 SIERRAS
NUEVA CON GARANTIA
| Specifications | BS-1212HR-TN | BS-1616HR-TN |
|---|---|---|
| Max. Cutting Capacity | 12" x 12" | 16" x 16" |
| Distance between Blade to Conveyor | 1/4" ~ 12" | |
| Saw Wheel Diameter | 28" x 2 | |
| Saw Blade Length (Width) | 201" (2") | 201" (2" ~ 3") |
| Saw Blade Speed | 6000 FPM | |
| Feed Conveyor Width | 12" | 16" |
| Feed Speed (Variable) | 0 ~ 90 FPM | |
| Main Motor (Each Head) | 20 HP x 2 | 30 HP x 2 |
| Saw Blade Lift Motor | 1/2 HP | |
| Feed Conveyor Motor | 3 HP | |
| Dust Hood | 4" x 6 | |
| N. W. | 7200 LBS | 8600 LBS |
- Machine was built with ruggedly constructed throughout for maximum stability, high precision cutting and minimum trouble.
- It is equipped with a digital controller for convenient and accurate thickness setting.
- The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts.
- When the feed conveyor is tilted for bevel cutting a side support is applied for safe and stable cutting operations.
- Variable feed speed is controlled by a frequency inverter for best cutting requested.
- The infeed and outfeed pressure rollers are easily raised or lowered by a gear rack.
- The infeed and outfeed pressure rollers are spring loaded and easily adjusted for the horizontal or vertical direction to suit various workpiece thicknesses.
- Blade tension is adjusted by means of a hand wheel.
- A tension scale allows the operator to correctly adjusted the tension for different blade thickness.
- The cast iron saw blade wheel are dynamically balance for smooth running.
- Blade guard is easily lifted up, supported by two nitrogen gas cylinders for convenient blade change.
- The roller type return conveyor equipped at left side of the machine provides easily repetitive cutting.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ESPIGADORA DOBLE
PARTE # 12005 – ESPIGADORA DOBLE MESA – PADE T45Limpiada y revisadaMaximum Tenon Length: 100mmMaximum Tenon Thickness: 30mmMaximum Tenon Depth: 50mmVertical Table Adjustment: 100mmTraversal Table Adjustment: 50mmTables TiltPneumatic Hold-DownsCutterhead Motor: 3 HPRevolution Motor: 1 HPMechanical Digital Readouts for Tenon AdjustmentsCurrently Wired for 460v, 3ph (Please Ask About Available Voltage Change to 230v, 3ph)
AMXmachinery
ESPIGADORA DOBLE DE CADENA - CAPACIDAD 59” - FRIULMAC
PARTE: 12415 – ESPIGADORA DOBLE DE CADENA - CAPACIDAD 59”
- FRIULMAC
USADA - BUENAS CONDICIONESModel
ContouramatWorkpiece
Length: 115 - 1500mm (4.52" - 59")Workpiece
Width: 30 - 250mm (1.2" - 10")Workpiece
Thickness: 12 - 50mm (.5" - 2")Left
& Right Top & Bottom Trip SawsTrim Saw
Motors are 4 HP Each (Two Per Side)Trim Saw
Blade Diameter: 125 - 180mmLeft
& Right Profiling/Cope StationsCope
Motors: 7.4 HP EachProfiling
Cutterhead Diameter: 160 - 220mmHopper
Feed
...
AMXmachinery
PARTE: 12305 - CABEZALES PARA MOLDURADORA - 1-13/16” FLECHA X 6” DIAMETRO X 2.25” - 3”, 4”, 5”, 6” LARGOS
PARTE: 12305 - CABEZALES PARA MOLDURADORA - 1-13/16” FLECHA X 6” DIAMETRO X 2.25” - 3”, 4”, 5”, 6” LARGOS
USADOS - MUY BUENAS CONDICIONES
North American
Gladu hydro-lock
6 alas
20 grados
Diámetro interior - Flecha 1-13/16 - si quita el buje 2-1/8"
Diámetro exterior: 6” (150 mm)
Largos:Largo 2-1/4” (57 mm) – existencia – 11 piezas Largo 3” (75 mm) – existencia – 4 piezasLargo 4” (102 mm) – existencia – 4 piezasLargo...