Identificador: 1126
Abierta
Descripción
PARTE: 2EV-01092.1 – ENSAMBLADO RESISTENCIAS – OVERHEAD HEATER
Con 4 clips SS para colgadores
Tamaño paquete 166” x 6” x 6”
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12407 - ASTILLADOR - 60 HP - VERTICAL - VECOPLAN
PARTE: 12407 - ASTILLADOR - 60 HP - VERTICAL - VECOPLAN
Usado - Buenas CondicionesStretch
Slow Speed60
HP Motor
Control
Panel
AMXmachinery
SOLDADORA DE MADERA - ALTA FRECUENCIA
PARTE: 2TE-0001 – SOLDADORA DE MADERA – ALTA FRECUENCIANuevo con garantíaFeatures:Weight150 lbsDimensions66 × 43 × 44 cmSupply240 volt / 50hz (standard 13-amp 3-pin plug)Generator frequencyNominal 27.2 MhzCuring speed3 – 10 seconds per weldPenetration50mm effectiveOutput0.5 – 0.6 amps at 2400 volts (internal HT) on loadFinishHardwearing powder coated finishElectrical SafetyCabinet and fittings are fully earthed. Cutout switch isolates main power if rear access panel is removed. 10 amp...
AMXmachinery
MOLDURADORA – 5 CABEZALES – WEINIG PROFIMAT 26
PARTE: 12106 – MOLDURADORA – 5 CABEZALES – WEINIG PROFIMAT 26Usada – Muy buenas condicionesWeinig Moulder and Grinder packageWorking capacity: 9-1/16” x 4-3/4”Spindles Configuration: B-R-L-T-T-BMotors: Bottom 10 HP, Right / Left 10 HP, Top 15 HP, Top 20 HP and Bottom 10 hp.Spindles: Dia. 1 1/2" with rotation at 6,000 RPM. Digiset readouts for left and top spindles. Readouts on chipbreaker and hold down. Weinig ATS -E for left and top radial positioning.Feed: Variable speed 4 HP with ...
AMXmachinery
PART: 12633 – TEMPLATE MAKER - ISEL-AUTOMATION
PART: 12633 – TEMPLATE MAKER -
ISEL-AUTOMATION
Used - Mechanically the machine is like new -
Sold as is
It is complete and worked well
until we stopped using it many years ago.
Don't have the software for it so
we can’t currently run it.
As I mentioned, it is a project,
and you would need to track down software and a computer to connect to.
Mechanically the machine is like
new.