Identificador: 1979
Abierta
Descripción
ROLADORA DE METAL
Is a heavy-duty, affordable, production tool for forming curved parts and tubes in 16-gauge and lighter sheet metal. The roll has three gear-driven rolls that ensure even starting and feeding of materials. The gearing features a 4:1 reduction ratio for ease of operation of heavy materials. All gears are fully enclosed for safety and protection from the elements. The roll drive is controlled by a toggle-action, shrouded foot switch for instant forward and reverse action. The drive motor is equipped with an electro-magnetic brake to prevent roll creep and over-forming.
Electrical and operator safety features include a full-length, front and back wire cable safety mechanism which instantly stops the rolls when tripped, two magnetic motor starters, fully enclosed electrical box with pilot light, insulated reinforced conduit for all wiring and fully enclosed drive train.
|
Maximum Forming Capacity, Mild Steel 16 gauge/1,6mm |
|
Maximum Forming Capacity, Stainless Steel 20 gauge/1,0mm |
|
Maximum Forming Length 49 in / 1244mm |
|
Minimum Forming Radius 1-1/2 in. / 38mm |
|
Wire grooves 3/8, ½, 5/8 in. / 9.5, 12.7, 15.8 mm |
|
Diameter of rolls 3 in. / 76mm |
|
Gear Ratio 4 : 1 |
|
Roll Speed 22 rpm |
|
Motor-230/460v, 3-phase, 60Hz ¾ hp |
|
Dimensions LxWxH 77 x 29x 50 in. |
|
Shipping Weight 1400 lbs / 635 kg |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery1
TALADRO MULTIPLE - SISTEMA 21
PARTE: EJG-MAG-SYSTEM21 - TALADRO MULTIPLE - SISTEMA 21Provides a 21 spindle 32 mm universal drilling solution, with horizontal and vertical boring capabilities and pneumatic tilting of the boring unit with locking points from 0 to 90 degrees for quick set-up at any angle;Accurate positioning of the boring unit to the table with digital readout.3-Phase Option. Single Phase also available.0 to 2.5" adjustable drilling depth with patented spiral setting device.(2) patented quick release materi...
AMXmachinery1
SIERRA MULTIPLE - 4 A 6 SIERRAS MOVIBLES
PARTE: 2CK-MRS610MFEATURESThe Main Frame is Cast IronHD Precision Straight Line Feeding caterpillar Chain typeFully Programmable Position sets or Infinitely variable foot pedal position setUser friendly Touch Screen controlQuick Saw Blade positioning by Servo MotorBlade positioning by Electronic Joystick Control (Efficient & Quick) or the touch screen controlsEquipped to shift 4 saws independently or 2 saw per shifter (optional as a cluster) on the with a single or bank of saws on the inside or ...
AMXmachinery1
ASTILLADORA - 16 PULGADAS
PARTE: 2TA-WG-1620 - ASTILLADORA - 16 PULGADASFeatures:A specially designed, powerful crusher for different materials such as wood, plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usage.Cutter head angle cutting design allows aggressive cutting rates & high speed shredding of ...
AMXmachinery1
LIJADORA DE BANDA VERTICAL - 6 PULGADAS
PARTE: 2CK-CT108Has a 6” x 108” long belt with 39” wide platen for straight edge sanding and 3” drum for curve sanding. Table are adjustable up and down and can be angled for full belt utilization. This is the ideal edge sander for sanding cabinet door edges, furniture components, and more.Large front table can be tilted and adjusted in height to utilize the full width of the sanding beltSide table is supplied for sanding curved components and can be adjusted in heightRugged heavy gaug...