Identificador: 740
Abierta
Descripción
PARTE: 11723 - SECANTE DE CHAPA - 2 CAMAS
4 - SECANTE EN FASE DE INSTALACION CON 2 CAMAS MISMAS CARACTERISTICAS DEL ANTERIOR
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12561 - REASERRADORA - 2 BANDAS - MORGAN - CON REGRESADOR
PARTE: 12561
- REASERRADORA - 2 BANDAS - MORGAN - CON REGRESADOR
Usada - Buenas CondicionesReturn (needs new belt)460 V/3phEquipped with 6” wide infeed and outfeed belt conveyor (hydraulically driven).Equipped with (2) pneumatic hydraulicly driven hold down wheels.Max width cutting capacity: 6” approx.Push button controls. Dual Head design.Each head is powered by a dedicated motor.HP unknown(manufacturing plates are missing on both saw motors and hydraulic pump)Overall dimensions: 156�...
-500x500.jpg)
AMXmachinery
PARTE: 12540 - PINCH ROLLER - CAPACIDAD 62” - EVANS
PARTE: 12540 - PINCH ROLLER - CAPACIDAD 62”
- EVANS
USADA - BUENAS CONDICIONESCapacity with Solid Top and SegmentedBottom RollerMax.Width: 62"Feed rate 50 Feet Per MinuteSafety Gates on in-feed and out-feed
sidesWorks with Contact Adhesive or PVA's
white glueHeavy Duty Construction1/2 Hp, 8 Amps 110V MotorWorking Height: 30.5"Max. Thickness: 2"Air Requirement: 100 PSI
Foot Print:
74" x 28"
AMXmachinery
TALADRO MULTIPLE - 23 TALADROS – VERTICAL – CON PEDAL
PARTE # RT-R19F3 – TALADRO MULTIPLE - 23 TALADROS – VERTICAL – CON PEDAL
Nueva con garantía
23-Spindle
Drill Head
Gear
Driven Spindles on 32mm Centers
Index
Pins
3
HP Spindle Drive Motor, TEFC
10mm
Bored Collets
(12)
Right Hand, (11) Left Hand
12″
Throat Depth
60″
Back Fence With (4) Stops
24″
X 48″ Work Table Surface
(2)
Spring Operated Hold Downs
Wired
3-Phase 240/480 Volt, 60 Hz.
Pneumatic
Driven Boring Cycle
Tooling
Not In...
AMXmachinery
CEPILLOS DE ALAMBRE PARA ACABADO RUSTICO
CEPILLOS PARA DAR ACABADO RUSTICO A LA MADERAPARTE # 2TM-A-001 - CEPILLO DE ALAMBREDiámetro agujero central: 1-5/8”Diámetro exterior: 150 mm (5.90”)Largo: 400 mm (15.74”) PARTE # 2TM-N-001 - CEPILLO DE NYLONDiámetro agujero central: 1-5/8”Diámetro exterior: 150 mm (5.90”)Largo: 400 mm (15.74”) Notas:Se fabrican medidas especiales