Identificador: 740
Abierta
ID de articulo : # 740 se ha agregado a su lista de deseos.
Descripción
PARTE: 11723 - SECANTE DE CHAPA - 2 CAMAS
4 - SECANTE EN FASE DE INSTALACION CON 2 CAMAS MISMAS CARACTERISTICAS DEL ANTERIOR
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2TA-PL-18 - CEPILLO 2 CARAS 18", 24" Y 38"
PARTE: 2TA-PL-18 - CEPILLO 2 CARAS - 18" ANCHOPARTE: 2TA-PL-24 - CEPILLO 2 CARAS - 24" ANCHOPARTE: 2TA-PL-38 - CEPILLO 2 CARAS - 38" ANCHOOPCIONES:CABEZAL CON CUCHILLAS EN ESPIRALCT-SCH-14T 14MM x 14MM - NAVAJAS PARA CABEZAL EN ESPIRAL CT-SCH-15T 15MM x 15MM - NAVAJAS PARA CABEZAL EN ESPIRALFEATURES:- Upper & lower Straight Cutterheads for accurate and powerful two sided planning in one pass.- Optional Auto digital thickness control for quickly and accrue set up.- The work table surface was pre...
-500x500.jpg)
AMXmachinery
LIJADORA DE TAMBOR
PARTE # 2TA-DS-2500 - LIJADORA DE TAMBOR LOBO/CASTALY - 25" DE ANCHOPARTE # 2TA-DS-3700 - LIJADORA DE TAMBOR LOBO/CASTALY - 37" DE ANCHOCaracteristicas:- Easily operate with performance for sanding flat objects.- Heavy sheet metal cabinet stand.- Balanced cast aluminum sanding drums.- Two different grits and level sanding drums are designed for fast and fine finish at one pass.- First drum is cast aluminum; second drum is coated with rubber for fine sand paper.- Automatic feeding operates by non...
AMXmachinery
MESA DE TIJERA AEREA CON PLATAFORMA
PARTE: 12048 – MESA DE TIJERA AEREA CON PLATAFORMAUsada en buenas condiciones de operaciónMax Platform Height: 25.4′Platform Width: 30″Working Height: 31.4″Wheelbase: 74″Gradeability: 25%Capacity: 500 Lbs.864 Hours
AMXmachinery
CEPILLO 1 CARA - 250 MM ANCHO - 3 HP - MARUNAKA
PARTE:
3MA-SUPERMECA-S - CEPILLO 1 CARA - 250 MM ANCHO - 3 HP - MARUNAKA
NUEVO CON GARANTIAAble to operate by auto return feedingMax Work width x Height : 250 mm (40º) 165 mm (60º)Max work height: 180mmKnife bias angle: 0 - 60 degree (variable)Feed speed: 54m/min (50 hz)Feed motor : 2.2 Kw, 3 phaseHead elevation motor : 0.1 Kw phaseKnife type: Chanching blade typeFront knife size : 335 x 66 x 8mmAccessories:Changing blades, front and rear roller tables and
standard toolsMachine size: (W...