Identificador: 3156
Abierta
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
PARTE: 12742 - SIERRA CINTA 34"
Tested and works as it should.
No brake
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
LIJADORA DE MOLDURAS
PARTE: 2LA-230 - LIJADORA DE MOLDURASIs a two spindle machine designed for use with flexible brush type sanding wheels. The spindles adjust individually, with vertical, horizontal, tilt and rotation. It can be placed at the outfeed end of a moulder, over a table, or used to sand free-hand.designed for flexible brushesfully adjustable individually, with vertical, horizontal, tilt, and rotation.
-500x500.png)
AMXmachinery1
BARRENADORA HORIZONTAL - 3 HUSILLOS
PARTE: 2RI-R131 - BARRENADORA HORIZONTAL - 3 HUSILLOSDescription:Designed for a dedicated and accurate boring center with single, double or triple spindle boring capability. Stile and rail boring set-up features help eliminate costly mistakes, rejected parts and increase production efficiency. The workpiece is held firmly against the table by a pneumatic clamp, and there is full adjustability of the index stops, bed height, and depth of cut.Standard Features:Triple Spindle Gear Driven Drill H...
-500x500.png)
AMXmachinery1
SIERRA TRONZADORA
PARTE: 4ST-TR 600 - SIERRA TRONZADORACUT OFF SAWS WITH ASCENDING BLADECLASSIC TOOLS FOR SAWINGIs a cut off saw that was born out to meet the crosscutting needs of large industries.Thanks to its robustness, a hydraulic saw unit drive with bimanual hand-saving controlto a motor power of 9 kW and a 600 mm diameter blade it can cut up to 160 mm thick and 610 mm wide.Technical specifications Cutting unit Blade diameter600 mmBlade rotation speed3000 rpmBlade motor powerkW 9 (HP 12,5)Blade drivingTwo...
AMXmachinery1
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA - 1 LADO
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA
- 1 LADO
NUEVO CON GARANTIAOffers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length. The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long. The heads are accurately adjusted using mechanical digital readouts. The spiral insert heads produce an extremely smooth finish result. The tw...