Identificador: 3125
Abierta
Descripción
PARTE: 4ST-TR 501 - SIERRA TRONZADORA
CUT OFF SAWS WITH ASCENDING BLADE
CLASSIC TOOLS FOR SAWING
Is a cut off saw that was born out to meet the crosscutting needs of small and large industries.
Thanks to a pneumatic saw unit drive with bimanual hand-saving control, a motor power of 9 kW
and a 500 mm diameter blade it can cut up to 135 mm thick and 360 mm wide.
Technical specifications Cutting unit
Blade diameter
- 500 mm
Blade rotation speed
- 3000 rpm
Blade motor power
- kW 7,5 (HP 10)
Blade driving
- Two-handed starting system
Working table height
- 895 mm
Workpiece loading
- Front and Side
Max operating pressure
- 6-8 bar
Extraction outlets
- 2 x Ø100 mm
Net weight
- 500 kg
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ESPIGADORA DOBLE
PARTE: 3RE- D60M - ESPIGADORA DOBLE Professional solution for volume producing two ends profile of panel furniture, door, solid wood floor, solid wood composite floor, PVC floor, MBF floor, wood-plastic composite with max thickness 85mm.Characteristic1. Each spindle can rotate , convenient to achieve angle-truncate , tenon, groove and etc2. Can hoggers on cut-off saw that can discharge waste material more helpfully3. Adopted widen by high precision linear orbit, machine can run in precision ...
-500x500.png)
AMXmachinery1
MAQUINA DE COPEADO
PARTE: 2PI-CMJ-HSK - MAQUINA DE COPEADOIs a machine designed for chip free coping or tenoning of either square or profiled parts without the need for a back-up piece or chip breaker. Two independent spindles with the tool changer is a great fit for medium to large shops that need to quick-change between multiple profiles per day.No backer board or chip breakers requiredTear out free parts every timeAccurate spindle adjustment for tool alignmentPart stays fixed while the carriage movesDual Air-L...
-500x500.jpg)
AMXmachinery1
SIERRA SE VAIVEN - 300 MM
PARTE: 2CK-FR-300 - SIERRA SE VAIVENFEED ROLLS & PRESSURE ROLLSBottom Rolls – 7 pieces in Front Section & 5 pieces in Rear SectionTop Front section is equipped with 7 pressure rollers & 3 air cylinders controlled by sensorTop Rear section is equipped with 5 pressure rollers & 1 air cylinder controlled by sensor
Motor
20 HP +1/2 HP + 5kW(Servo) + 2HP
Blower
Max.
Working Thickness
310 mm
Min.
Working Thickness...
-500x500.jpg)
AMXmachinery1
MOLDURADORA - 5 CABEZALES - 7” ANCHO - LEADERMAC LMC 518S SMARTMAC
PARTE: 2CK- LMC-518S - MOLDURADORA
- 5 CABEZALES - 7” ANCHO - LEADERMAC LMC 518S SMARTMAC
SPECIFICATIONS
Thickness of material
.4”(to ¼” optional) to 5”
Width of material
.6” to 7” (8” optional)
Min lenght of material
8” (butt fed)
Axial Adjust (side heads)
.8” (20 mm)
Axial Adjust
(top/btm heads)
.8” (20
m...