Identificador: 1798
Abierta
Descripción
PARTE: 2CK-C12RSH
Is a single-blade ripsaw geared towards the shop looking to increase efficiency in their ripping operations but can not justify a multi-blade ripsaw. With its precision cast iron chain and track assembly, and extended pressure section, the C12RSH can produce a glue joint finish ready for panel glue-up right out of the saw.
- Produces a guaranteed glue joint finish to 10′, which eliminates the need to joint the material after ripping
- Precision straight line feeding for parallel and accurate rip cuts
- Eight hold down rollers over six rows ensure material is firmly held during cutting operations for a longer period resulting in a straighter, more precise cut.
- Maintenance-free chain track with the use of a reliable mechanical lubrication system.
KEY ADVANTAGES
- Cast iron saw assembly, column, and table with superior vibration damping properties for optimum cutting results while ensuring long bearing and machine life.
- Rigid machine body consists of a thick welded steel frame.
- FC35 cast iron chain track with double-V design ensures precision straight-line ripping with a long wear life.
- Precision Built Saw Arbor constructed of nickel-chrome steel, large diameter, accurately ground and dynamically balanced.
- Arbor runs in precision angular contact type ball bearings (eliminates any radial run-out & axial thrust) – V Belt driven from below.
- Mechanical operation Chain Oiler provides consistent lubrication to the chain track and automatically adjusts to your feed speed.
- When oil runs low, a warning light will come on, and when it gets too low, the machine track stops running to avoid damage to the track.
- Cast iron rip fence is mounted to a large diameter round guide rail with a quick-locking lever for effortless and accurate adjustment.
- 3 sets of anti-kickback fingers. 2 top and 1 set in the table for added operator safety.
- Soft start – Star Delta starter reduces the amp draw on startup.
- Optional laser light to project the cutting line to achieve maximum material yield.
|
Saw arbor diameter |
1″ |
|
Saw blade diameter |
10 – 12″ |
|
Saw arbor speed |
4500 rpm |
|
Feed Speeds – variable |
50 to 120 FPM |
|
Maximum workpiece thickness |
3.34″ (12″ blade) |
|
Minimum workpiece length |
8″ |
|
Glue line guarantee |
10’ (+/- 0.0098” or 0.25mm) |
|
Distance between saw and column |
18″ |
|
Arbor motor |
15 HP |
|
Feed motor |
1 HP |
|
Electrical |
46 amps (230V); 23 amps (460V) |
|
Table size |
39″ x 57″ |
|
Table height |
31-7/8″ |
|
Dust port size |
4″ |
|
Net weight |
2,090 lbs |
|
Machine dimensions |
68” x 46” x 62” |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA TRIMMER - 60", 98" & 120" LARGO
PARTE: 2CK-CK-2200 - SIERRA TRIMMER - 60", 98" & 120" LARGOThrough feed double cut off saw with loader for linking with 4 sided moulders leads to a reduction in man power requirementsEasy loading using hopper ensures maximum throughput capacity reachedSystem will cut boards to desired length, and automatically feed the cut boards continuously through the moulder butt to buttSystem comes complete with automatic waste conveyor for easy removal of offcuts to disposal area.Also available in differ...
-500x500.png)
AMXmachinery1
CANTEADORA AUTOMATICA
PARTE: 3HO-HT600C - CANTEADORA AUTOMATICAThe single-sided edge banding machine is designed for bonding rectangular workpieces with various edge materials: PVC, ABS, acrylic.Banding Tape Thickness0.3-3mmBanding Tape Width12-60mmWorkpiece Thickness10-55mmWorkpiece Length>=80mmWorkpiece Width>=45mmFeeding Speed12m/minHeating Power1.8kwFeeding Motor Power1.5kwGlue Spreading Motor Power0.75kwEnd Trimming Motor Power0.37kw x 2Fine Trimming Motor Power0.75kw x 2Rough Trimming Motor Power0.75kw x ...
-500x500.png)
AMXmachinery1
SISTEMA DE ENTRADA PARA MOLDURADORA - ALIMENTADOR
PARTE: 2LE-004 - SISTEMA DE ENTRADA PARA MOLDURADORA - ALIMENTADORIncreased productionLower labor requirementsErgonomic designThe Hopper Feeder continuously feeds work pieces into a moulder. The boards are manually placed in a vertical accumulation Hopper. A web top conveyor belt separates the work pieces at high speeds and feeds them into the moulder.
AMXmachinery1
SIERRA MULTIPLE - 1 SIERRA
PARTE: 2CK-303SIs a straight line ripsaw that is the ideal ripping upgrade for those looking to prepare material for a moulder or for producing face frame material. Automatically feeds the material for consistent rip results. The cast iron feed chain runs on double V guide rails and holds the material firmly for precision straight cutting. A powerful 10 HP motor with maximum 12” blade provides a cutting depth up to 3.35”. A micro adjustable infeed fence allows for quick setups to ensur...