Identificador: 1798
Abierta
ID de articulo : # 1798 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-C12RSH
Is a single-blade ripsaw geared towards the shop looking to increase efficiency in their ripping operations but can not justify a multi-blade ripsaw. With its precision cast iron chain and track assembly, and extended pressure section, the C12RSH can produce a glue joint finish ready for panel glue-up right out of the saw.
- Produces a guaranteed glue joint finish to 10′, which eliminates the need to joint the material after ripping
- Precision straight line feeding for parallel and accurate rip cuts
- Eight hold down rollers over six rows ensure material is firmly held during cutting operations for a longer period resulting in a straighter, more precise cut.
- Maintenance-free chain track with the use of a reliable mechanical lubrication system.
KEY ADVANTAGES
- Cast iron saw assembly, column, and table with superior vibration damping properties for optimum cutting results while ensuring long bearing and machine life.
- Rigid machine body consists of a thick welded steel frame.
- FC35 cast iron chain track with double-V design ensures precision straight-line ripping with a long wear life.
- Precision Built Saw Arbor constructed of nickel-chrome steel, large diameter, accurately ground and dynamically balanced.
- Arbor runs in precision angular contact type ball bearings (eliminates any radial run-out & axial thrust) – V Belt driven from below.
- Mechanical operation Chain Oiler provides consistent lubrication to the chain track and automatically adjusts to your feed speed.
- When oil runs low, a warning light will come on, and when it gets too low, the machine track stops running to avoid damage to the track.
- Cast iron rip fence is mounted to a large diameter round guide rail with a quick-locking lever for effortless and accurate adjustment.
- 3 sets of anti-kickback fingers. 2 top and 1 set in the table for added operator safety.
- Soft start – Star Delta starter reduces the amp draw on startup.
- Optional laser light to project the cutting line to achieve maximum material yield.
|
Saw arbor diameter |
1″ |
|
Saw blade diameter |
10 – 12″ |
|
Saw arbor speed |
4500 rpm |
|
Feed Speeds – variable |
50 to 120 FPM |
|
Maximum workpiece thickness |
3.34″ (12″ blade) |
|
Minimum workpiece length |
8″ |
|
Glue line guarantee |
10’ (+/- 0.0098” or 0.25mm) |
|
Distance between saw and column |
18″ |
|
Arbor motor |
15 HP |
|
Feed motor |
1 HP |
|
Electrical |
46 amps (230V); 23 amps (460V) |
|
Table size |
39″ x 57″ |
|
Table height |
31-7/8″ |
|
Dust port size |
4″ |
|
Net weight |
2,090 lbs |
|
Machine dimensions |
68” x 46” x 62” |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery1
PARTE: 2CK-HR12E - REASERRADORA HORIZONTAL - 1 BANDA - 20 HP – 11.8” ANCHO X 4.92” ESPESOR
PARTE:
2CK-HR12E - REASERRADORA HORIZONTAL - 1 BANDA - 20 HP – 11.8” ANCHO X 4.92”
ESPESORNUEVA CON GARANTIA
2 OPCIONES: 230/1/60 - 460/3/60Can produce a cut up to 11.8” wide and 4.92” thick. Capable of handling material from 11.8” wide to 9.8” thick. The powerful 20HP motor makes easy work of even hard to cut wood material. The thin kerf 1” wide blade achieves optimum cut quality while maximizing material yield. The user-friendly controls and operation make will all...
AMXmachinery1
EXTRACTOR - CAMPANAS DE EXTRACCION PARA COCINA
PARTE: 1AM - EXTRACTOR - CAMPANAS DE EXTRACCION PARA COCINA-FABRICADAS EN ACERO INOX. P3, GRADO ALIMENTICIO - PARTE FRONTAL, LATERALES, TECHO Y FILTROS EN LAMINA
CAL. 20 CON GOTERÓN EN LAMINA CAL. 18 - SOPORTA FILTROS Y RESPALDO EN LAMINA GALVANIZADA - INCLUYE FILTROS TIPO LABERINTO
- INCLUYE CAPELOS PARA ILUMINACIÓN - NO INCLUYE DUCTERÍA NI EXTRACTOR
Cantidad de
Capelos
Largo
1
1 m
2
1.5 m
...
AMXmachinery1
TORNO 32 x 120''
TORNO 32 x 120'' PARTE: 2GM-GML-32120Heavy Duty Precision Gap Bed Lathe 32” x 120” 4-1/8” bore, 15HP Motor.ISO 9001 certifiedLarge spindle bore 4-1/8”4-way rapid traverse on Longitudinal and cross waysAll dual inch/metric dials. solid cast iron machine baseHeavy Duty main motor 15 HP12 spindle speeds from 25-1,600 rpm54 kinds of inch threads and metric threadsThreading and feeding rate change by leversSpindle is balanced, hardened and precision groundSpindle is supported a...
AMXmachinery1
PARTE: 4NE-FUERTE - CENTRO DE MAQUINADO CNC - 10 HP - FUERTE
PARTE: 4NE-FUERTE - CENTRO DE MAQUINADO CNC - 10 HP - FUERTESpindle: HERTZ 8.5 KW 24000 rpm ISO30 (TURKEY)• Vacuum Pump: BLOWER VAKUM POMPASI• Working Capacity: 2100mm*2800mm (2100mm*3660mm Option)• Remote Control: YES• Automatic Self Lubrication System: YES ( ILC - Italian )• 10 Tool capacity tool magazine back side of chassis• 10 Toolholder• Vacuum Zone: 6 zone for 2128 / 8 zone for 2136• Automatic Unloading and Cleaning System: Optional• Total Power: 19 kw• Weight: 3000 kg...