Identificador: 354
Abierta
Descripción
PARTE: 3YH-YFC-14 – SIERRA TRONZADORA – 5 HP – SIERRA 14” – AMX MACHINERY
MAQUINA EN FOTO: IZQUIERDA
OPCIONAL: DERECHA
SPECIFICATIONS
Cutting capacity (Thickness x Width)：1" x 10", 2" x 9", 3" x 8"
Cycle speed：95 cuts/min
Cycle operation：Pneumatic
Saw blade diameter (Option)：ø14"
Saw arbor diameter：ø1"/ 30mm
Saw blade speed ：4100 rpm
Dust exhaust diameter：ø4" x (1)
Saw arbor motor：5HP / 7.5HP
Table size：630X 590mm
Net weight：240 kgs
Gross weight：290 kgs
Packing dimensions(LxWxH)：770x 760x 1300mm
FEATURES
Table surface is precision ground, assuring cutting accuracy.
The sawblade on the left side is standard machine, shown as picture. (Option, the sawbalde on the right side)
Cycle speed is adjustable and up to 95 strokes per minute.
Motion cycle is pneumatic operated and controlled by foot switch. (Option, dual hand buttons)
Powerful 5HP (7.5HP) motor drive.
T-clamp is easily adjusted for workpiece thickness variation.
Convenient and fast sawblade replacement.
Proper dust collection design to keep cabinet clean.
Roller Conveyor (Option)
Standard length is 1M. Available in any length.
Outfeed roller conveyor is with extension stop and aluminum extruded rear fence.
Extension Stop (Option)
Extension stop is used on outfeed roller conveyor. It is convenient for length stop and for repetitive cutting in a mass production line.
There are 3 kinds of extension stop, fix stop, flip stop and lift stop.
Safety Switch (Option)
When operator approaches the cutting area, the safety switch controls T-clamp and unable to cut workpiece.
Safety Guard (Option)
The complete safety for fast cutting operation and to avoid operator to approach the cutting area.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA RADIAL AUTOMATICA
PARTE: 2EV-0710 – SIERRA RADIAL - AUTO - EVANS 0710Power feed with
variable speed control
35 1/2 "
working height. Adjustable leveling feet.
NEW: Additional
guarding on both sides of the blade and around the controlsPreset 90°, 45°, and 22-1/2° Cut Guides16” Saw Blade with a 1” ArborPneumatic Saw GuardSwing Out Supports for LongerLengths4” Dust PortVariable Speed: 0-50 FPMMax Cut Stroke: 50”Work Surface: 60” X 96”Drive Motor: 3 HPElectrical: 230 V, 3 PH, 60 HzAir Requir...
AMXmachinery
RENSA RADIO FRECUENCIA L&L
PARTE # 10111 - PRENSA RADIO FRECUENCIA L&LMODELO GA-84CAPACIDAD DE PEGADO 48" ANCHO X 84" LARGO X 4-1/2" ALTO10KWGENERADOR DE FRECUENCIA INCLUIDOMESA DE ALIMENTACION Y SALIDAEN BUENAS CONDICIONES DE OPERACION
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 19 LITROS
PARTE:
2PG-FUSION7 - HORNO PARA CERAMICA, VIDRIO, METALES – 19 LITROSNUEVO CON GARANTIAThe digital Sentry Xpress 3 key controller comes standard on all Fusion-series kilns. Control both heating and cooling with simple 3-key operation.The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold.Features of the Sentry Xpress 3-key Controller on Non-Ceramic Paragon KilnsDesign programs with up to 8 segments (steps) in Ramp-Hold mode.Fire...
AMXmachinery
PARTE: 1SL-DC-DP5M – TALADRO DE BANCO – MOTOR ½ HP, 110V, 1 FASE
PARTE: 1SL-DC-DP5M – TALADRO DE BANCO – MOTOR ½ HP, 110V,
1 FASE110V, 60 Hz, 1 FASE5 VELOCIDADES: 740 - 3140 RPMCHUCK: 1.5 A 13 MMDISTANCIA DEL CHUCK A COLUMNA: 104 MMCARRERA CHUCK: 50 MMDISTANCIA DEL CHUCK A LA MESA: 160 MMDISTANCIA DEL CHUCK A LA BASE: 250 MMDIMENSIONES DE LA MESA: 164 X 164 MMDIMENSIONES TOTALES: 590 MM X 400 MM X 180 MMPESO: 19 KGSEMPAQUE: 1 CAJA